I am remodeling my little comm closet, I am putting some new servers (desktops) for my home lab cluster, and I wanted to clean up the install. 

This includes the wall mounts for the mini-computers I am using for Proxmox VE cluster nodes, an 8 port 2.5gbe switch, and their power bricks. 

Printing is done mostly on-edge with supports so the grain goes in the direction of the stress. The computer mount has ears at the top that allow the external USB Drive to be held in place by friction/tension between some notches. The USB Drive is intentionally spaced up off the computer for about an inch to not impede airflow. 

I had a bunch of black pla that is kindof messy, and I printed it as max draft speed, so it looks pretty rough but I am going for function over form here.

BEE-LINK SER5 Pro wall mount and USB Drive Carrier

bee-link-ser5pro.stl

This is a small wall-mount holder for a Pi 
 based KVM called TinyPilot. I found it easier to have a little wall mount jobbie than futzing with velcro. This uploaded version is my final draft, the one in the pictures is the beta. It works great.



TinyPilot Raspberry Pi based KVM Wall Mount

This is a small wall-mount holder for a PiKVM. I found it easier to have a little wall mount jobbie than futzing with velcro. This uploaded version is my final draft, the one in the pictures is the beta. It works great.

PiKVM Wall Mount

This is a simple tap and ream holder in a single gridfinity block. It holds the following:

- 2mm tap 
- 3mm tap 
- 4mm tap 
- 5mm tap 
- 6mm tap 
- 6mm end-mill
- deburring tool
- tapered ream with t-handle

It features raised numbers for the taps and end-mill. No particular slicing settings are needed. The holes are .5mm oversized for a nice fit. I like the set the tapered ream with a few turns first time I seat it to make it nice and snug.

Gridfinity tap and ream holder

I couldn't find a set of drawers that weren't somehow a compromise for me... I had these requirements.

1. Standard height bins (like the snazzy vase mode ones with the labels)
2. Compact, with just 4 bin wide and 3 bin short
3. No supports for printing
4. Stackable without too much headache

I had a few iterations and this is the one that I like. The drawers have about .5mm gap all the way around to account for any warping on a normal draft print. The pulls on the front have fillets to eliminate supports. I printed the drawers in 3 different quality settings and found no discernible difference in the fitment.

The carcass has big openings in the back to ease in the opening and closing of the drawers. On early iterations, it had that extremely satisfying piston effect with really tight tolerances… but I couldn't get the dang drawers open. So this gives me better function. 

The little feet will nest nicely in the mated extrusion in the top, with a little taper to the feet for a snug fit. I considered reversing the extrude on the feet to recess it for magnets top and bottom. Still, after some time, it seemed unnecessary to stick them together like that… it was more secure than simple stacking but not as secure as some fastener, so it just wasn't worth the extra post print work to me.

I included the fusion 360 drawings. It is based on a Gridfinity parametric base ([I can't figure out who the original author is but here's the link](https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e439591db365903a026)) I found on Reddit, which I butchered during my process… so no more parameters unless you like chaos. Originally I was going to make it empty and drop in a pre-printed base but found this template to grab. I am a TOTAL noob when it comes to 3d printing, so simmer down when you see all my inefficient methods. :-)

Big thanks to the [Anchorage Makerspace](https://www.anchoragemakerspace.com) for the training and the tools to learn to do this. NOICE!



Gridfinity Drawer Cabinet with 3x4 standard height bin grid

Grid drawer 3x4 v6 - carcass.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>Jesse Perry in Anchorage Alaska</p></div>

jptechnical

BEE-LINK SER5 Pro wall mount and USB Drive Carrier

TinyPilot Raspberry Pi based KVM Wall Mount

PiKVM Wall Mount

Gridfinity tap and ream holder

Gridfinity Drawer Cabinet with 3x4 standard height bin grid