bowl "heliopora coral"

A coral inspired bowl for whatever is just flying around and needs a proper storage location.

Scaling / size

• Upscaling (100% +): as big as you want
• Regular size (100%): 200 x 200 x38 mm
• Smaller (80%): 160 x 160 x 30mm
• Small (60%): 120 x 120 x 23 mm
• I would not scale it down below 40%

Print settings Material usage (100% scale): 200g Print time: (100% scale): 17h

Material usage (80% scale):120g Print time: (80% scale): 11h

Material usage (60% scale): 60g Print time: (60% scale): 5h

Material: PLA Print direction: stl is rotated correctly Support: none Outer walls: 3 Infill: 15% Build plate adhesion type: none