A watering can attachment for a True Fruits bottle. The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.
Size: 60 x 60 x 120 mm This is the V2
Print settings Required build volume: 60 x 60 x 120 mm Material usage: 45g Print time: 4h-5h
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0,28mm Outer walls: 3 Infill: 20% Build plate adhesion type: a brim if you have bad bed adhesion
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.