tracking pixel

Order summary

Towel hanger 3d model
Towel hanger

Price$3.00
Sales taxEnter address for total

Add promo code

Total dueEnter address for total

Powered by

Payment details

PayPal
Card
By confirming your purchase, you allow Thangs to charge your card for this payment in accordance with their terms.
gazzaladra

Towel hanger

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 1 of 5
Towel hanger 3d model
gazzaladra
gazzaladra
|
Image 1 of 5
Towel hanger 3d model
2D
3D
Makes
Towel hanger 3d model
Towel hanger 3d model
Towel hanger 3d model
Towel hanger 3d model
Towel hanger 3d model
This model is restricted by licensing terms. 

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours. This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.

You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm

Print settings Required build volume: 180 x 180 x 60 mm Material usage: 40g Print time: 4h – 5h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0,28 mm Outer walls: 3 Infill: 20% Build plate adhesion type: none


10 Likes54 DownloadsJune 5, 2023


10 Likes54 DownloadsJune 5, 2023
This model is restricted by licensing terms.