A beautiful toothbrush holder with a unscrewable bottom for easy cleaning. I always had trouble keeping my toothbrush holder clean. Even putting it in the dishwasher did not result in a clean, hygienic cup. That's why I designed a holder that allows you to simply unscrew the bottom and clean it more easily. This way you get a more hygienic result with less effort.
Size: 76 x 76 x 103 mm This is the V3
Print settings Required build volume: 100x100x100 mm Material usage: 90g Print time: 3h base, 6h body
Material: PLA Print direction: stls are rotated correctly, check images (yes the body is printed upside down due to the threads) Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none (if you have bad bed adhesion consider using a brim for the body since it is printed upside down)
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.