A Planter inspired by old video games. It is a low poly, slightly crooked design to commemorate how things looked like in the early days. While oddly shaped the planter is very functional and fast to print with a lifted drainage for happy little plants.
Scaling / size
- Upscaling (100% +): as big as you want
- Regular size (100%): 193 x 128 x 131 mm – has a wall thickness of 2 mm
- Smaller (80%): 154 x 102 x 105 mm – has a wall thickness of 1.6 mm
- Minimum size (60%): 116 x 77 x 79 mm – has a wall thickness of 1.2 mm
Print settings Required build volume: 200 x 200 x 140 mm Material usage: 230 g Print time: 13 h
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none
Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.