An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every day (like your favorite Benchy or a small plant) this is the one for you. This one is based on four 3d scans that I had for dinner afterwards.

Versions

• Pleurotus_Eryngii_shelf_A and _B: The shelves in the default size
• Pleurotus_Eryngii _shelf_no_holder_A and _B: The shelves without the cut-out intended for scaling down – must be mounted with glue or tape.
• Pleurotus_Eryngii _shelf_small_A and _B: The shelves in the mini version (60% scale)
• Pleurotus_Eryngii_holder_default: the holder for the default size with a screw-hole diameter of 5.5mm
• Pleurotus_Eryngii _holder_small: A holder for the mini version – simply scaling down the default version would make the holder unusable
• Pleurotus_Eryngii _holder_for_upscaling: If you want a huge version, scale up shelf and use this holder – the only difference is the screw-hole size of 3mm that will be usable when scaled.

Instructions

• Print the shelf and holder
• You can either screw or glue it onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. Old fashioned screws and dowels are the most reliable fixation.
• Insert the shelf by moving it horizontally onto the holder until the holder is completely inside the cutout. Then proceed to move the shelf down and the holder locks.
• Enjoy!

Print settings Required build volume: 190mm x190mm x 110 mm Material usage: 180 g

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none