Mushroom shelf “Fungus”

An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every day (like your favorite Benchy or a small plant) this is the one for you. You can either screw or glue it onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size assembled: 80 mm x 115 mm x 105 mm

Print settings Required build volume: 120mm x120mm x 120 mm Material usage: 40g Print time: 3 – 4 h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none