Magnetic Mushrooms - Fidget Toy with Magnetics, Joystick, Slider, Pop Fidgets
bygazzaladra
This model is restricted by licensing terms.
View license.
13 Likes11 DownloadsSeptember 28, 2024
This model is restricted by licensing terms.
View license.
This model was made in collaboration with Forgecore. Go check out all his other fidget designs!
A set of magnetic mushroom fidgets to keep your fingers busy. The Mushroom caps and stems each have a magnet inside. This allows you to fidget with the caps in satisfying ways. The Penny Bun is a pot cap fidget, the morel mushroom is a joystick fidget, and the shiitake is a slider fidget.
Versions included
- A: For 10 x 2 mm magnets
- B: For 3/8’’ x 1/2’’ magnets – this version also magnetizes on the bottom, which allows you to store them on anything metal – also comes with 3MF multi color files
Instructions
- Get the right neodymium magnets, preferably in N45 or N52 strength
- Print the head, stem and two magnet covers for each mushroom
- Glue in the magnets – be careful with the orientation so they actually magnetize together!
- Glue in the covers
Print settings Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,08 mm Infill: 15% Build plate adhesion type: a brim for the morel head is advised, none for all other parts
Categories:
13 Likes11 DownloadsSeptember 28, 2024
This model is restricted by licensing terms.
View license.
13 Likes11 DownloadsSeptember 28, 2024
This model is restricted by licensing terms.
View license.