Glasses case
A protective case for your glasses or sunglasses. Before insertion bend the lid in the front a little to ease up the living hinge. Move it in and out a few times to “sand down” minor print inconsistencies. For increased scratch protection, lay in a glasses cleaning cloth.
Size closed: 170 x 68 x 31 mm Maximum glasses size: 155 x 60 x 26 mm
Print settings Required build volume: 180 x 180 x 40 mm Material usage: 80 g Print time: 6 h
Heat/Material: PLA is what I used. If you live in an Area that becomes very hot in the Summer, it is smart to go for a heat resistant type of filament with a high heat deflection temperature to avoid deformation in the direct sun. There are PLA products that serve this purpose, PETG is also a workable solution. Make sure to go for bright colors and avoid black and other dark filaments since those absorb more heat.
Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none