Egg cup “Avocado”
A cute egg cup with extra space for the cut off top. I always disliked having the shell pieces on my plate when having breakfast, so I designed a egg cup that can hold everything in place.
Just glue the two parts together and you are ready to go.
Size assembled: 96 x74 x 32 mm
Print settings Material usage per cup: 50g Print time per cup: 4h
The Peel: This part should be printed “upside down” (as in the images) to get a better surface texture and overhang quality. If your printer refuses to produce decent bridging results - you can use support as backup solution. If it struggles with bed adhesion - you can use a brim or print in the other way round.
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none