Designed a simple bumper case for the Analogue Pocket. Inspired by this case on thingiverse by Santiis2010: https://www.thingiverse.com/thing:5372312.

Wanted one that covers everything minus screen and trigger buttons, and that one doesn't quite go all the way to the top in the back of the console.

I also designed a Gridfinity bin, incase you are into the Gridfinity storage system and want to store your Analogue Pocket without having to take the case off.

Printed in TPU:
60mm/s
0.2mm layer height
Supports enabled everywhere

Analogue Pocket Bumper Case

Analogue Pocket Case_.stl

Designed this small jig to help cut the leads on 5mm RGB LEDs and bending the leads after cutting them so all of them are equal ahead of soldering them for assembling of an 8x8x8 RGB LED cube. The kit I used was the iCubeSmart from amazon.


Order of operation:
1. Insert LED into the main base.
2.Insert both bending jig plates securing LED into base (note the key posts on the plates)
3.Insert the cutting jig.
4.Cut leads flush with wire cutter.
5.Remove cutting jig. Bend wires into adjacent grooves with tweezers.
6.Push LED out by placing base on top of the push out base.

Designed for 5mm LEDs.

Printed on 0.2mm layer height, supports only of the bending jig to preserve narrow bending grooves' quality.

8x8x8 RGB LED Cube Cut and Bend Jig

LED Base - Solid.stl

I designed a simple 3x4 gridfinity bin for the Analogue Pocket. Included are files for inserts that can be printed in TPU to protect the device from scratches.

Printed in 0.2mm layer height, 15% infill
Gridfinity bin printed in PLA. Soft inserts in 95A TPU.

If printing TPU is not an option, you can buy self-adhesive 1.5mm foam sheets on Amazon and cut them to cover the inside.

Gridfinity Analogue Pocket Bin - TPU Inserts

Gridfinity Analogue Pocket Bin - No Case.stl

A simple 4x4 design for the Hoto Cordless Electric Screwdriver. Fits in an ikea Alex drawer.

Printed at 20% infill, 0.2mm layer height

Gridfinity Hoto Cordless Electric ScrewDriver Bin

Gridfinity Hoto Power ScrewDriver Bin.stl

A simple 2x4 design for the HOTO Air Capsule's accessories. Tried to keep it as small as possible, while fitting all the accessories that comes with it. Fits in an Ikea Alex drawer.

Printed at 20% infill, 0.2mm layer height

Gridfinity Hoto Vaccum Accessories Bin

Gridfinity Hoto Vaccum Accessories Bin.stl

A simple 1x3 design for a flexible LED headband. Fits in an ikea Alex drawer.

Printed at 20% infill, 0.2mm layer height

Gridfinity LED Headband Bin

Gridfinity LED Headband Bin v2.stl

A simple 2x5 design for the HOTO Precision Screwdriver kit. Wanted to keep the nice magnetic cover carrying case it came in, so designed one for it. Fits in an ikea Alex drawer.

Printed at 20% infill, 0.2mm layer height

Gridfinity Hoto Precision Screwdriver (Electric)

2x5 Gridfinity Hoto Precision Screwdriver.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

fr.lopez4

Achievements

Seedling

Voyager

Debutant