An adapter that fits in the Filter-end of the Rendyr Optic laser.

There is a 1.22 inch exhaust hole for small-diameter shop vac hoses.

Optic Filter Adapter 1.22in hole.stl

Prefilter Frame for the Optic laser cutter by Rendyr.

There is a magnet in the base of the original that is 10mm in diameter.  I have 6 mm magnets so my hole is smaller.  This replacement still works with the smaller magnet.

Here is theOnShape model if you want to make any adjustments
https://cad.onshape.com/documents/38bf3fac51896ff328ed75e8/w/e15d599f6b5ee2c0e8cdfea8/e/117adeb29797ee7454551465

Optic Prefilter Frame.stl

An adapter that fits in the Filter-end of the Rendyr Optic laser.

There is a 2.5 inch exhaust hole for "standard shop vac hoses.  

Optic Filter Adapter 2.5in hole.stl

An adapter that fits in the Filter-end of the Rendyr Optic laser.

There is no exhaust hole.  You can measure your hose and use your slicer's functionality to remove a cylinder of the correct size.

Optic Flter Adapter No Hole.stl

Optic laser cutter by Rendyr

Upperbody gauge at 11.60 mm

Optic Height Gauges - Upperbody Gauge.stl

Optic laser cutter by Rendyr

Offset gauge at 27.00 mm

Optic Height Gauges - Offset Gauge.stl

Optic laser cutter by Rendyr

Engraving gauge at 28.00 mm

Optic Height Gauges - Engraving Gauge.stl

For the Optic laser cutter

Cutting Gauge at 26.0 mm

Optic Height Gauges - Cutting Gauge.stl

Split Sleeve Wire Shelf Clips for 1" pipe.

With a 0.2mm Layer height, you can print in place with no supports.

OnShape Model Available at 
https://cad.onshape.com/documents/98dda0fa9afb8523aa7dc8e7/w/1950d6f88b612b55e377a99a/e/2eae640fd37506a12adec530?renderMode=0&uiState=62f2ed3f316bdb7a69a04d8e

Split Sleeve double.stl

Split Sleeve Wire Shelf Clips for 1" pipe.

OnShape Model Available at 
https://cad.onshape.com/documents/98dda0fa9afb8523aa7dc8e7/w/1950d6f88b612b55e377a99a/e/2eae640fd37506a12adec530?renderMode=0&uiState=62f2ed3f316bdb7a69a04d8e

Split Sleeve Wire Shelf Clips for 1" pipe.

OnShape Model Availble at 
https://cad.onshape.com/documents/98dda0fa9afb8523aa7dc8e7/w/1950d6f88b612b55e377a99a/e/2eae640fd37506a12adec530?renderMode=0&uiState=62f2ed3f316bdb7a69a04d8e

Split Sleeve single.stl

The original barrel had a very thin connection between the top and the threaded neck. So thin that when I first printed it the neck came clean off the barrel. 

I updated the fillet on the inside of the neck. There may be more issues with overhang on the inside of the neck, but the whole print performs much better than the original version.

Mason Jar Tumbler Barrel.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

erik.felton

Achievements

Seedling