Introducing new clock design into our catalogue. This piece is designed to grace your desk, mantel, or bedside table with its refined style.

Very easy to print and assemble. Simply install the clock mechanism into the face and gently push it into the hole back of the clock frame. You have the option to print the clock hands or use the default ones coming with the mechanism.

**Supports ** No supports needed

**Scaling ** I wouldn't recommend scaling this model as it is designed to support a standard clock mechanism. The clock mechanism I am using is: https://www.amazon.co.uk/dp/B08VWCCK43

Model Dimensions Height: 22 cm / 8.66 inches Length: 12 cm / 4.72 Width: 10 cm / 3.93 inches

3D Printing Settings

_Clock Face _ Layer Height: 0.2 mm Infill: 15% Wall Generator: Arachne NOTE: Clock Face is printed facing down in order to print the hours and minutes lines.

Clock Frame Layer Height: 0.2 mm Infill: 15%

Clock Cover Layer Height: 0.2 mm Infill: 15%

_Clock Hands _ Layer Height: 0.2 mm Infill: 100%

NOTE: Because the clock hands are small, they break very easy. You need to be gentle, especially with the clock hands for seconds, doesn't need any pressure to fit it into the clock mechanism hole. Reduce the speed as low as possible so the seconds hand can be printed successfully.

**Filament Used ** Bambu Dark Red Matte PLA Bambu Lilac Purple Matte PLA  Bambu Black Matte PLA Bambu Ivory White Matte PLA

You are not authorized to use our pictures