tracking pixel
D

Minimal Tablet Wall Mount (9mm opening)

by

dfoles

Follow
Follow
Remix Model
Like
D
dfoles
Image 1 of 8
Minimal Tablet Wall Mount (9mm opening) 3d model
2D
3D
Makes
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
Minimal Tablet Wall Mount (9mm opening) 3d model
This model is restricted by licensing terms. 
0 Likes1 DownloadsJanuary 10, 2023
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3516627.

I remixed my original model to be as minimal as possible. This is a wall mount that's been designed for the Nexus 10, but it should fit most tablets < 9mm thick. You should be able to print the model as it is oriented without supports. You can get away with just two corners if you do one at the bottom, and the other diagonally at the top.

I have included two optional corners that have a cut out, one left and one right, to allow access to buttons near the corner. Should work for Nexus and iPads.


0 Likes1 DownloadsJanuary 10, 2023




This model is restricted by licensing terms. 
0 Likes1 DownloadsJanuary 10, 2023
This model is restricted by licensing terms.