Zeus and the Giants (Stone Carving) - Hueforge Print
bycyanidesugar
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6206864.
Zeus and the Giants
This was printed with a 0.2 nozzle, which produces 0.04mm layers a little nicer. It is possible with a 0.4 nozzle, though you will need to have calibrated your printer and filaments very carefully.
You can however, still print this with a 0.4 nozzle and change the layer height to 0.08mm, by just adjusting the .hfp file.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used: PLA Siddament Black Transmission Distance: 0.2 PLA+ Sunlu Coffee Transmission Distance: 3 PLA Sunlu Beige Transmission Distance: 8.2 PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions: Start with Black At layer #24 (1.08mm) swap to Coffee At layer #28 (1.24mm) swap to Beige At layer #43 (1.84mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.