Steampunk Plague Doctor - Hueforge Print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ Sunlu Dark Gold Transmission Distance: 1.8
• PLA+ eSun Grey Transmission Distance: 1.4
• PLA Sunlu Beige Transmission Distance: 8.2
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #8 (0.72mm) swap to Dark Gold
• At layer #9 (0.8mm) swap to Grey
• At layer #12 (1.04mm) swap to Beige
• At layer #18 (1.52mm) swap to White for the rest.