cyanidesugar

Oversized Snorlax Pokemon Card - Hueforge Hybrid

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 2 of 4
Oversized Snorlax Pokemon Card - Hueforge Hybrid 3d model
cyanidesugar
cyanidesugar
|
Image 2 of 4
Oversized Snorlax Pokemon Card - Hueforge Hybrid 3d model
2D
3D
Makes
Oversized Snorlax Pokemon Card - Hueforge Hybrid 3d model
Oversized Snorlax Pokemon Card - Hueforge Hybrid 3d model
Oversized Snorlax Pokemon Card - Hueforge Hybrid 3d model
Oversized Snorlax Pokemon Card - Hueforge Hybrid 3d model
This model is restricted by licensing terms. 

Adding Snorlax to the Oversized Pokemon Card collection!

Note: I have uploaded images of the UNPAINTED Snorlax model since previously there's been some confusion about the fact that you will have to manually paint the Snorlax (with actual paints) even though I have specified this in the instructions. The model and the included 3MF file with the filament swaps will print EXACTLY what you see in the images attached.

The 3MF will include all the necessary filament swaps for you! If you do not want to use the 3MF, and would like to use your own settings, please follow the instructions below. If you resize this, please only resize the X and Y dimensions!

Print Instructions For the HueForge portion (0.00mm - 2.60mm)

  • Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

For Snorlax (2.60mm and above)

  • Print at 10% infill (I used cross hatch) at a layer height of 0.16mm
  • 5 top, 4 bottom surfaces, 3 walls
  • Concentric top surface pattern

Filaments Used:

  • PLA Kingroon Black Transmission Distance: 0.2
  • PLA Chrominal Serpent Green Transmission Distance: 8.2
  • PLA BambuLab Basic BambuLab Green Transmission Distance: 2
  • PLA META SUNLU Yellow Transmission Distance: 6.8
  • PLA BambuLab Basic Red Transmission Distance: 5
  • PLA Chrominal Penumbra Gray Transmission Distance: 6.9
  • PLA Kingroon White Transmission Distance: 5.8
  • PLA Overture Blue Transmission Distance: 4.0 (This is for the Snorlax!)

Swap Instructions:

  • Start with Black
  • At layer 0.76mm swap to Serpent Green
  • At layer 0.84mm swap to BambuLab Green
  • At layer 1mm swap to Yellow
  • At layer 1.24mm swap to Red
  • At layer 1.48mm swap to Penumbra Gray
  • At layer 1.88mm swap to White for the rest.

Post-Processing You will need to paint Snorlax yourself. Or, alternatively if you're particularly enterprising, paint Snorlax in your slicer, but you will need to change the layer swaps to height range modifiers!

The Snorlax model was created by JettoHobby and can be found here!


If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.



15 Likes23 DownloadsNovember 7, 2024


15 Likes23 DownloadsNovember 7, 2024
This model is restricted by licensing terms.