Hey friends!
This double exposure cat print is another one that you can be really flexible with colours. It kind of makes the print look like a shadow box print, especially if you pair it with The Crafty Maker's newly released single slot frame!
Loading the 3MF will give you the layer swaps for Bambu printers and Bambu Studio. If you do not use Bambu, you can load the STL and follow the instructions below! Again, you can be very flexible with your colour choices for this one!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Overture Dark Blue Transmission Distance: 4
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
- Start with Black
- At layer #4 (0.44mm) swap to Dark Blue
- At layer #5 (0.52mm) swap to Lemon Yellow
- At layer #9 (0.84mm) swap to Teal
- At layer #13 (1.16mm) swap to BambuLab Green
- At layer #15 (1.32mm) swap to Jade White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.
If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!