Fireworks at Night - Dual Lithophane Hueforge Print

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6235229.

**Fireworks at Night - Dual Lithophane Hueforge Print **

This print is a really, really cool dual lithophane piece. If you put a backlight behind it, or hold it up against a light, it will shine through the fireworks as if the print is coming to life.

Video here: https://imgur.com/7386cnX

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used: - PLA META Sunlu White Transmission Distance: 9.6 - PLA Overture Cream Transmission Distance: 8.4 - PLA META Sunlu Red Transmission Distance: 4 - PLA+ Overture Dark Blue Transmission Distance: 1.8 - PLA META Sunlu White Transmission Distance: 9.6 - PLA Siddament Black Transmission Distance: 0.2

Swap Instructions: - Start with White - At layer #20 (0.96mm) swap to Cream - At layer #31 (1.4mm) swap to Red - At layer #42 (1.84mm) swap to Dark Blue - At layer #48 (2.08mm) swap to White - At layer #49 (2.12mm) swap to Black for the rest.