Bear in the Forest - Hueforge Print

A 150mm x 100mm print of a bear walking through the forest.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4

• PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8

• PLA+ Sunlu Coffee Transmission Distance: 3

• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #15 (0.72mm) swap to Dark Gold (Dark Brown)
• At layer #18 (0.84mm) swap to Coffee
• At layer #27 (1.2mm) swap to White for the rest.