[Early Access] Prince of Persia - HueForge Print

[This is an Early Access file that will be made available to the public at a later date, and is exclusively for subscribers for now!]

So... did anyone else sit around their PC when they were a kid and watch their dad play this game and get more and more frustrated every time he game over-ed? Or uh... maybe you were the dad? LOL!

Back in the days of floppy disks and DOS prompts - what a time! I hope you enjoy the nostalgia of print as much as I did!

My gray unfortunately was not as dry as I'd like it and caused pesky extrusion issues :(

But other than that, this one came out great!!

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 240x160mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

• PLA BambuLab Matte Charcoal Transmission Distance: 0.6
• PLA CC3D Blue Gray Transmission Distance: 2.8
• PLA Kingroon White Transmission Distance: 5.8
• PLA BambuLab Tough Vermilion Red Transmission Distance: 3
• PLA PolyTerra Pastel Peach Transmission Distance: 1.7

Swap Instructions:

• Start with Charcoal
• At layer #8 (0.48mm) swap to Blue Gray
• At layer #14 (0.72mm) swap to White -At layer #18 (0.88mm) swap to Vermilion Red
• At layer #27 (1.24mm) swap to Pastel Peach
• At layer #31 (1.4mm) swap to White for the rest.

Happy Printing!