This curious table lamp design is born with a recycling purpose that makes it a unique piece.
Net Lamps reuse the plastic nets of fruits and vegetables from the supermarket to give color to its internal aura and set thematic spaces. This model is the medium size, perfect for wider nets.
Its futuristic design allows for a multitude of combinations. They can be used perfectly without nets but I invite you to reuse them in this creative way if you have them at home. The nets can be placed around the bulb, inside the body, or covering it on the outside. You can mix different colored nets to create unique effects.
In addition, you can combine bases of different colors and create different heights as they are modular lamps.
To discover all its possibilities and use explanatory videos you can visit my instagram: https://www.instagram.com/creaserra
3D PRINTING PARAMETERS The printing of each of the two parts is done with an infill around 20% and a recommended layer height of 0.2 mm although I could use a higher layer height for the printing of the body.
The body (NLbodyM.stl) should be printed with transparent plastic (I used transparent PLA from 3DJake) or white to be able to create the color sets inside.
For the base (NLbaseM.stl) it should be printed in the reverse orientation (legs up) and using support for the slot. For this part I used a green matte PLA and a white PLA but you can use any color you want.