Devin B

*FREEBIE* PUFFT Planter

by
Make Anything
Follow
Follow
Remix Model
clancy.shaun
clancy.shaun
|
|
Image 8 of 8
*FREEBIE* PUFFT Planter - Printed well with matte pastel blue pla. Increased the z height slightly. - 3d model
clancy.shaun
clancy.shaun
|
|
Image 8 of 8
*FREEBIE* PUFFT Planter - Printed well with matte pastel blue pla. Increased the z height slightly. - 3d model
2D
3D
Makes
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter 3d model
*FREEBIE* PUFFT Planter - Printed well with matte pastel blue pla. Increased the z height slightly. - 3d model
This model is restricted by licensing terms. 

The PUFFT Planter resembles a soft woven form to bring warmth to your home. This planter is 164 mm tall and 218 mm at its widest point. It can be scaled up and down to suit your plant or another purpose.

This pot includes 6x 15 mm drainage holes on the bottom for growing live plants and pairs well with my 170 mm Floating Drip Tray (90mm strut version) to allow for excess runoff.

Printing Guidelines

This planter is designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a 0.8+ mm nozzle width (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers.

For the hole version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Hollow' version for standard printing, with 1.2mm thick walls. I've found the vase mode version to work well, but certain printers and situations may benefit from the solid version.


Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Polymaker PolyTerra Pastel Mint PLA (US direct)* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!


23 Likes82 DownloadsOctober 5, 2024


23 Likes82 DownloadsOctober 5, 2024
This model is restricted by licensing terms.