Have you been looking AROUND for a new vase? I have just the vase to ROLL out onto your printer, the torus vase!

**Print Settings**
Unfortunately this cannot be printed in vase mode due to its construction but, it does not need supports! The bottom half is solid so that it has some weight to support whatever flowers you wanted to display.

I printed it at .2mm layer height with 25% infill and with 2 perimeters/shells. You can print it at a higher layer height to speed up the print time.

Happy Printing!

Torus Vase

Torus Vase.STEP

When it's sealed, this perplexing container appears to have three intersecting dovetail joints. In reality, the joints curve so you can twist off the lid. I think it makes a pretty fun container for any little trinkets.

If you want a tricky box that locks, check out my other Dastardly Dovetail Puzzle Boxes!

Photographed model was printed with [MatterHackers Quantum PLA](https://bit.ly/quantumPLA) ([Also on Amazon](https://amzn.to/48c18rF))

---

[Relevant Video](https://youtu.be/9EumyZKUzhs?si=2h3srUN81GTLk_N1)

Dastardly Dovetail Box (Round)

roundDD_Bottom.stl

Remix of Scalable Round Screw-Top Box by 3dprintbunny

Christmas Remix of Scalable Round Screw-Top Box

Christmas Screw.stl

This rounded variation of the hexasphericon has the same whimsical rolling motion as the original with the added fun of it's bulbous appearance

If the parts aren't a tight fit you can use [E6000 adhesive](https://amzn.to/45Hpx6y) or similar.

Printed in [MatterHackers Metallic Gold PRO PLA](https://bit.ly/PRO-PLA)

See my [video of these in action here](https://youtu.be/eESLIrxw2x0)

Tube Hexasphericon

hexasphericontube.stl


Lil' bowler hats, wear 'em how you like!

18mm inner diameter, scale as required or desired. No supports required.

---


[More Lil'Hats'N'Stuff](https://thangs.com/?tags=lil%27hats%27n%27stuff&sort=likes&range=alltime#content)

[Relevant Video](https://youtu.be/TeOiT-DbVNQ)

Bowler Hat // Lil'Hats'N'Stuff

Based off of the .223 NATO Wikipedia's dimensions photo [here](https://upload.wikimedia.org/wikipedia/commons/1/1a/.223_Remington.svg).

(I am aware that 5.56 and .223 are different, however, they are dimensionally identical except for the loaded pressure.)

Can be used as a keychain with the loop in the bullet, or in the bottom of the casing.

You can also use PrusaSlicer to add a cut on the keychain model right where the casing meets the bullet to print them in separate colours as I have in the photo. You can also add connectors to easily attach/detach. Could also print the bullet with a ‘tip’ of another colour like red/black/green for different types.

Used the following filaments:

Casing: AMOLEN Silk 1.75mm Gold

Bullet: AMOLEN Silk 1.75mm Red Copper

Note about file naming:
KeyChain - Loop in Top
Keychain_bottom - Loop in bottom
full - No keychain Loop
precut - Has cut + connector for multi-color bullet.
noPrimer - No indent for primer on bottom of casing. Had potential for stability issues. 

5.56/.223 Bullet Ornament + Keychain

556_nato_keychain_noPrimer.stl

This sphericon has been modified to the point where it's not really a sphericon anymore, but it sure makes a cool stylized ball!

See my video of these in action [here](https://youtu.be/eESLIrxw2x0).

Prints in two halves with a core piece to align them. If it's not a tight fit you can use [E6000 adhesive](https://amzn.to/47A5J6B) to glue it all together.

16 Point Sphericon

16point.stl

Made in my lunch break for practice but I’m happy with its form so thought it would be a shame to bin it.

zag sphere vase.stl

Here are two Bolt covers for M8 Hex head bolts as well as round Allen head bolts

Rounded Bolt covers

M8 Rounded Bolt Cover.STL

This is a base for most of my design.
Wanted to share it to let you compose your own design.
Hope you'll enjoy it!.


Remixable Round Rotating Keychain - Print in place.

Lil' round fram glasses, wear 'em how you like!

18mm inner diameter, scale as required or desired. No supports required.

---


[More Lil'Hats'N'Stuff](https://thangs.com/?tags=lil%27hats%27n%27stuff&sort=likes&range=alltime#content)

[Relevant Video](https://youtu.be/TeOiT-DbVNQ)

Rounded Frames // Lil'Hats'N'Stuff

Here is a vase with the walls shaped like bubbles.

Preferable to print in vase mode with line width 0.5/0.6 

Bubble Vase

here is my version of Gridfinity stuff for stuffing stuff inspired by ZackFreedman [https://thangs.com/designer/ZackFreedman](url) the creator of the Gridfinity System that we all love.

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

this model is fully parametric, you can find the customizable Fusion file in the download all attachment, if you can't use Fusion feel free to ask for custom dimensions in the comments and i will upload you a stl.

I've also uploaded a square and rectangular version of this model: [https://social.thangs.com/m/629906](url)

the model supports both round and elliptical holder and it is possible to configure 4 indents in the collar to facilitate the grubbing of the item,
all is done in the change parameter window in Fusion


waiting to see pictures of your versions uploaded here.
happy printing

Parametric round and elliptical holder for Gridfinity

bostik thread locker holder.stl

Remix of Scalable Round Screw-Top Box by 3dprintbunny. Enlarged height, added a ring inside to center a tealight. Added a diamond gem snowflake pattern to the lid.

Download the Mini Diamond Gem https://social.thangs.com/m/567492 to print diamond gems in the translucent color and medium of choice. 

**** Please note that different PLA and Resin materials expand and contract depending on many factors. I recommend printing the box first and then printing ONE gem and seeing how it fits, then adjust the scale as needed for the remaining gems. You also may need to use glue to keep the gems in place. I snap them in and use Polycrylic Gloss to seal the gems in place.

Snowflake Gem Tealight Box

This is a screw top round box that scales very well.

The boxes in the picture are printed at 100%, 60% and 40%.

Prints without supports

Scalable Round Screw-Top Box

snowflake_gem_box.stl

A more bulbous spin vase. Print in vase/spiralize mode with a few bottom layers and no top layers. You can also scale this model to whatever size you like!

The photos are Nylon models printed with a 1mm nozzle and dyed with [RIT dye](https://amzn.to/3DQZ3Dw) as shown in [this video](https://www.youtube.com/watch?v=1DiN72GdZo8)



Spin Vase No.4

A more bulbous spin vase. Print in vase/spiral/spiralize mode.

The photos are Nylon models printed with a 1mm nozzle and dyed with RIT dye as shown in my video :



Remix of Scalable Round Screw-Top Box by 3dprintbunny, second entry 

Christmas Tree Remix of Scalable Round Screw-Top Box

christmas tree case.stl

Holiday Remix of Scalable Round Screw-Top Box

Cute Keychain Inspired from the popular game. It can be printed all at once as the stl file is positioned (back face down).
Add supports as needed.
50mm diameter.
I hope you like it.

Fornite™ Inspired rotating round keychain - Print in place 

Cute Keychain Inspired from the popular game. It can be printed all at once as the stl file is positioned (back face down).
small supports are already included.
50mm diameter.
I hope you like it.

Fornite™ Inspired round keychain - Print in place - Little supports included

Here is a Bolt covers for M8 Hex head bolts shaped in the form of a button, which provides a sleek appearance.

M8 Button Bolt Cover

Classic Steam™ logo keychain.
rotating and round, 50mm diameter.
Print in Place as is, add supports as needed.
remixable.
I hope you'll enjoy it.

Steam™ logo inspired keychain - rotating round - Print in place

Classic Steam™ logo keychain.
rotating and round, 50mm diameter.
Print in Place as is.
remixable.
I hope you'll enjoy it.

round

Most Popular of All Time

Categories

Popular

Personalize

Trending