tracking pixel
The Blue Portal

BTT Pi TFT 43 Mount for Ender 3 S1

by
cj2tech91
Follow
Follow
Remix Model
BTT Pi TFT 43 Mount for Ender 3 S1 3d model
BTT Pi TFT 43 Mount for Ender 3 S1 3d model
2D
3D
Makes
Be the first to upload a Make

Created a Mount that replaces the OEM Screen on the Ender 3 S1 and use of the BigTreeTech TFT Pi 43. I split the print into two pieces to make it faster to print as well make them stronger once assembled. It also wanted to use the original screens screws to make it so anyone can print and just install . Also note I really wanted the tolerance of the case and screen to be pretty tight so make sure printer is calibrated before printing.

Made it under these guidelines:

easy to print able to screw screen to mount sturdy enough for everyday use smallest footprint as possible easily modifiable Flush to screen

Included is the 3mf files. Was designed using the following variables:

ScreenLength ScreenHeight ScreenTolerance ScreenCaseHeight ScreenCaseThicness ScreenMountingHoleSpaceingX ScreenMountingHoleSpaceingY RaspberryPiHoleSpaceingX RaspberryPiHoleSpaceingY BracketThickness ScreenIncline

I did some testing with changing the variables it should work fine if you change any of as long as they aren't grossly wild.

Recommendation for printing:

10% - 20% infill Min shell walls : 3 Print Orientation: as Flat as possible Supports: optional (the overhangs are bridgeable with minimal sagging)


0 Likes0 DownloadsOctober 26, 2024



0 Likes0 DownloadsOctober 26, 2024

Instructions

Filament • 2mm

MaterialPLA
Layer height2 mm
Infill density20 %
SupportsNone
BrimNo