Just a scan of a real eggplant from my garden. The middle model is printed in polymaker poly terra army purple with the stem in bambu matte green.  The other models are painted

eggplant scan

eggplant5.3mf

The Breville Nespresso Essenza machine is a great device with a tiny footptint. However due to its small size the wastewater reservoir often overflows creating a mess on the counter. I designed this overflow/spill tray to address that issue. Needs a foot pad near the front of the tray to level the machine out- have designed 2 versions with the foot pad integrated into the tray and one which prints separately which can be positioned to your preference and can be printed in a different filament like TPU.

when placing the machine carefully align the semicircular part that the water reservoir sits on.

coffee maker spill tray v1.3mf

coffe maker spill tray v1.3mf

nespresso coffee maker spill tray both versions.3mf

Just a wall plate for ethernet with a socket for an RJ-45 keystone

Ethernet Keystone wall plate.stl

philips-hue-bridge-ethernet+mount.3mf

Simple box with snap fit lid to store checkers coins, Diameter of well is 28.5 mm. Coins /board pieces can be found at
 https://www.printables.com/model/179722-checker-classic-and-stackable

Checkers coin  box.3mf

Simple lens cover for Canon EF 400mm f/4 DO IS II USM Lens - I couldn't find one so designed and printed in Bambu PETG

Canon lens cover with logo.3mf

Had some wasted space at the right and left edges of my skadis board created this to allow a vertical 20mm dia rod approx 200 mm in height- Its hollow so you can insert a connector and add an extension. It  should friction fit if not a dab of CA glue should do it. Not sure if anyone else will find it useful but i am using it as a vertical tape/ wire reel holder 

Skadis right and left edge mount rods.3mf

Simple rod that slides to adjust and threads into skadis mountable angle brackets 20-25 mm dia

skadis adjustable rod.stl

Skadis mountable holder for  608 bearing to slide over. The excellent original design -
https://makerworld.com/en/models/15647#profileId-48335-is 
meant for yarn/spools has a square/ rectangular profile that wouldn't allow a bearing to slide over. Just modified shaft to be rounded

608 bearing holder.3mf

Needed a 90 degree elbow adapter for a vent hose for my printer. Has grooves to seat hose clamps securely .
Printed in PETG with 0.4 mm nozzle Bambu X1C 0.2 layer height 4 walls organic tree supports. Long print>9 h

4 inch OD elbow with groove.3mf

Just a simple adapter/reducer to connect a 2 inch to 4 inch duct with grooves for the hoseclamps

4 inch to 2 inch duct adapter with groove for hoseclamp

100 to 49mm duct adapte with groove.3mf

Ikea Skadis mount version of the wallmount Dremel 4300
remixed from
 https://www.printables.com/model/592330-dremel-4250-4300-holder-with-separate-cable-rack-f
Download Skadis T nut files from
https://www.printables.com/model/469364-skadis-m3-t-nuts-mounting-no-m3-nuts-or-tapping-ne


Dremel 4300 Skadis T nut.3mf

Simple 2 tier Spice rack 260 mm long. Interlocking. 3 fit in most cabinets. Printed in Sunlu grey PETG. 0.4 mm nozzle. 15% gyroid infill. 4 walls. No supports. Print upright. 3mf file for Bambu has 3 + a 40 mm additional piece.

20 hour print on Bambu X1C

Spice shelf v3.stl

A simple end cap for the 1/2 inch conduit -snug fit..might have to tap it in. printed well in PETG and ABS.
I used it to cover reprack filament holder conduits

end cap half inch  conduit.3mf

end cap half inch  conduit.stl

Beautiful realistic model of a red deer . Fairly easy print  with tree supports but be careful when removing around the hooves. Printed on Bambu labs X1C in Bambu metallic gold PLA and polymaker dual extrusion 
Not my original remixed from 
https://www.craftsmanspace.com/free-3d-models/red-dear-3d-model.html

red_deer_large with snow base.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x160mm in size
 You may print at higher layer heights below the Min Depth of 0.48mm
 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
	PLA Duramic Brown Transmission Distance: 0.2
	PLA Voxel Matte Black Transmission Distance: 0.2
	PLA Sunlu chocolate Transmission Distance: 2.8
	PLA Bambu matte green Transmission Distance: 0.1
	PLA Kingroon Green Transmission Distance: 3.1
	PLA sunlu navy blue Transmission Distance: 4
	PLA Sunlu White Transmission Distance: 7.7
	PLA 3DHOJOR Matte Sky blue Transmission Distance: 0.7
This print uses 8 unique filaments

Swap Instructions:
	Start with Brown
	At layer #4 (0.4mm) swap to Matte Black
	At layer #6 (0.56mm) swap to chocolate
	At layer #11 (0.96mm) swap to matte green
	At layer #14 (1.2mm) swap to Green
	At layer #15 (1.28mm) swap to navy blue
	At layer #17 (1.44mm) swap to White
	At layer #26 (2.16mm) swap to Matte Sky blue for the rest.


hueforge sea turtle  200x160.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bugdoc

Achievements

Voyager

Seedling

Debutant