Ikea Skadis mount version of the wallmount Dremel 4300
remixed from
 https://www.printables.com/model/592330-dremel-4250-4300-holder-with-separate-cable-rack-f
Download Skadis T nut files from
https://www.printables.com/model/469364-skadis-m3-t-nuts-mounting-no-m3-nuts-or-tapping-ne


Dremel 4300 Skadis T nut.3mf

Simple 2 tier Spice rack 260 mm long. Interlocking. 3 fit in most cabinets. Printed in Sunlu grey PETG. 0.4 mm nozzle. 15% gyroid infill. 4 walls. No supports. Print upright. 3mf file for Bambu has 3 + a 40 mm additional piece.

20 hour print on Bambu X1C

Spice shelf v3.stl

A simple end cap for the 1/2 inch conduit -snug fit..might have to tap it in. printed well in PETG and ABS.
I used it to cover reprack filament holder conduits

end cap half inch  conduit.3mf

end cap half inch  conduit.stl

Beautiful realistic model of a red deer . Fairly easy print  with tree supports but be careful when removing around the hooves. Printed on Bambu labs X1C in Bambu metallic gold PLA and polymaker dual extrusion 
Not my original remixed from 
https://www.craftsmanspace.com/free-3d-models/red-dear-3d-model.html

red_deer_large with snow base.3mf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x160mm in size
 You may print at higher layer heights below the Min Depth of 0.48mm
 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
	PLA Duramic Brown Transmission Distance: 0.2
	PLA Voxel Matte Black Transmission Distance: 0.2
	PLA Sunlu chocolate Transmission Distance: 2.8
	PLA Bambu matte green Transmission Distance: 0.1
	PLA Kingroon Green Transmission Distance: 3.1
	PLA sunlu navy blue Transmission Distance: 4
	PLA Sunlu White Transmission Distance: 7.7
	PLA 3DHOJOR Matte Sky blue Transmission Distance: 0.7
This print uses 8 unique filaments

Swap Instructions:
	Start with Brown
	At layer #4 (0.4mm) swap to Matte Black
	At layer #6 (0.56mm) swap to chocolate
	At layer #11 (0.96mm) swap to matte green
	At layer #14 (1.2mm) swap to Green
	At layer #15 (1.28mm) swap to navy blue
	At layer #17 (1.44mm) swap to White
	At layer #26 (2.16mm) swap to Matte Sky blue for the rest.


hueforge sea turtle  200x160.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bugdoc

Dremel 4300 Skadis T nut.3mf

Spice shelf v3.stl

end cap half inch conduit.3mf

end cap half inch conduit.stl

red_deer_large with snow base.3mf

hueforge sea turtle 200x160.3mf