Based of the work of Zack Freedman and nolanleot here on Thangs.

I include the Fusion 360 Files that also include the "blank" from nolanleot so you can more easily modify to your needs.

quote from nolanleot's:

These blank Gridfinity blocks are to help you create your own #Gridfinity pieces. They use the original geometry - The curves are all accurate and should match the rest of your Gridfinity set!

Currently in the mix:
1x1 Block
1x2 Block
1x3 Block
1x4 Block
2x2 Block
2x3 Block
2x4 Block
3x3 Block

All blocks are 1.25" from base to max height.
All M3 screw holes are 1cm deep from the base.

Gridfinity Tips from Zack Freedman!
No brims or support required! Use any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big! All storage blocks are compatible with all baseplates! Most storage blocks are stackable! You can add 6x2mm magnets to the corners! They won't magnetize the contents. You can also use M3 screws in the corners.

https://thangs.com/designer/nolanleot/3d-model/Gridfinity%20Blank%20Blocks-211251

Gridfinity SAE 8 Point v1.step

Socket sizes are based on a set of Crescent tools I received when I was 16. I'm not sure if they will match your diameter. BUT! the fusion files are here so you can make them how you want!

Based of the work of Zack Freedman and nolanleot here on Thangs.

I include the Fusion 360 Files that also include the "blank" from nolanleot so you can more easily modify to your needs.

quote from nolanleot's:

These blank Gridfinity blocks are to help you create your own #Gridfinity pieces. They use the original geometry - The curves are all accurate and should match the rest of your Gridfinity set!

Currently in the mix:
1x1 Block
1x2 Block
1x3 Block
1x4 Block
2x2 Block
2x3 Block
2x4 Block
3x3 Block

All blocks are 1.25" from base to max height.
All M3 screw holes are 1cm deep from the base.

Gridfinity Tips from Zack Freedman!
No brims or support required! Use any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big! All storage blocks are compatible with all baseplates! Most storage blocks are stackable! You can add 6x2mm magnets to the corners! They won't magnetize the contents. You can also use M3 screws in the corners.

https://thangs.com/designer/nolanleot/3d-model/Gridfinity%20Blank%20Blocks-211251


Gridfinity SAE Deep Socket Tray Half Inch twelve point.step

Gridfinity Metric 19-13mm Deep Socket Tray v1.step

Socket sizes are based on a set of Crescent tools I received when I was 16. I'm not sure if they will match your diameter. BUT! the fusion files are here so you can make them how you want!

Socket sizes are based on a set of Crescent tools I received when I was 16. I'm not sure if they will match your diameter. BUT! the fusion files are here so you can make them how you want!

Based of the work of Zack Freedman and nolanleot here on Thangs. 

I include the Fusion 360 Files that also include the "blank" from nolanleot so you can more easily modify to your needs.

quote from nolanleot's:

These blank Gridfinity blocks are to help you create your own #Gridfinity pieces. They use the original geometry - The curves are all accurate and should match the rest of your Gridfinity set!

Currently in the mix:
1x1 Block
1x2 Block
1x3 Block
1x4 Block
2x2 Block
2x3 Block
2x4 Block
3x3 Block

All blocks are 1.25" from base to max height.
All M3 screw holes are 1cm deep from the base.

Gridfinity Tips from Zack Freedman!

    No brims or support required!
    Use any filament with an 0.6mm or smaller nozzle.
    Wider bins can curl, so maximize your bed adhesion if you're going big!
    All storage blocks are compatible with all baseplates!
    Most storage blocks are stackable!
    You can add 6x2mm magnets to the corners! They won't magnetize the contents.
    You can also use M3 screws in the corners.


https://thangs.com/designer/nolanleot/3d-model/Gridfinity%20Blank%20Blocks-211251


Gridfinity SAE Deep Socket Tray.step

Based of the work of Zack Freedman and nolanleot here on Thangs. 

I include the Fusion 360 Files that also include the "blank" from nolanleot so you can more easily modify to your needs.

quote from nolanleot's:

These blank Gridfinity blocks are to help you create your own #Gridfinity pieces. They use the original geometry - The curves are all accurate and should match the rest of your Gridfinity set!

Currently in the mix:
1x1 Block
1x2 Block
1x3 Block
1x4 Block
2x2 Block
2x3 Block
2x4 Block
3x3 Block

All blocks are 1.25" from base to max height.
All M3 screw holes are 1cm deep from the base.

Gridfinity Tips from Zack Freedman!

    No brims or support required!
    Use any filament with an 0.6mm or smaller nozzle.
    Wider bins can curl, so maximize your bed adhesion if you're going big!
    All storage blocks are compatible with all baseplates!
    Most storage blocks are stackable!
    You can add 6x2mm magnets to the corners! They won't magnetize the contents.
    You can also use M3 screws in the corners.


https://thangs.com/designer/nolanleot/3d-model/Gridfinity%20Blank%20Blocks-211251


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

balexander

Achievements

Seedling

Debutant

Trailblazer

Gridfinity SAE 8 Point v1.step

Gridfinity SAE Deep Socket Tray Half Inch twelve point.step

Gridfinity Metric 19-13mm Deep Socket Tray v1.step

Gridfinity SAE Deep Socket Tray.step