Profile Image
bakedbean3d
bakedbean3d

bakedbean3d

  • Creating fun and functional designs
  • Writing guides to make 3D printing easier for everyone
  • Modding my printers and exploring the bleeding edge of 3D printing hardware and software 🚀

Use my code: BB3D50 for 50% off your first month!

Happy printing!

Follow

Select a membership plan

Monthly billing
Annual billing
5% off
Maker: Limited Personal Plan
Maker: Limited Personal Plan
$4.75
/ month
when billed annually
  • 👾 Discord access to chat about what I'm working on, CAD, and 3D printing!
  • 🔥 Download 3 of my exclusive designs to print per month (with rollover credits!)
    • 1-2 new designs per month
    • Designs range from smartwatch charging stands, to fidget toys, to travel accessories, so there's something for everyone!

** This is a license to print the physical products, not to sell them. The digital files are NEVER for sharing.

Immediate access. Cancel anytime.
20% off
Seller: Full Commercial Plan1 member
Seller: Full Commercial Plan
$8.00
/ month
when billed annually
  • Everything in the previous tier
  • 💰 Access to sell any of my free designs that have the "CC BY-NC-ND 4.0" license
  • 🔥 Get access to all of my exclusive designs to print and sell
    • Seasonal designs as well as year-round designs!

Note: Attribution required: You must credit at the end of your product descriptions with: "Design licensed by BakedBean3D on Thangs."

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Immediate access. Cancel anytime.
10% off
Builder: 3D Printer Performance Seekers and Builders
Builder: 3D Printer Performance Seekers and Builders
$9.90
/ month
when billed annually
Limited (5 remaining)
  • Everything in the previous tier
  • 👾 Exclusive Discord channel where I will dedicate more time to help you with the following:
    • 📈 Improving the performance of your machine, mods, etc
    • 🔨 Helping you build/plan/troubleshoot your own Voron, RatRig, etc machine
    • ⚡️ Helping plan out and conduct electrical work safely and cleanly on your custom machine (Power supplies, 24/48v setup, smart switches, relays, breakers, MMUs, toolboards, etc.)

Note: There is always a risk when working with mains voltage and modding or building printers. I will advise you on the best and safest ways to go about the work, but I am not responsible for any damage or injury that occurs when you are building or modding your printer.

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Immediate access. Cancel anytime.
AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
Matthew J
Matthew J

RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating

by
bakedbean3dbakedbean3d
Follow
bakedbean3d
bakedbean3d
|
Image 1 of 8
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
bakedbean3d
bakedbean3d
|
Image 1 of 8
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
2D
3D
Makes
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model
RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating 3d model

RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating

8 downloads · 5 months ago · This is a bracket to mount 5015 fans to a V-Core 3.1's bed (or any bed with 5mm holes), which signif

This is a bracket to mount 5015 fans to a V-Core 3.1's bed (or any bed with 5mm holes), which significantly improves max chamber temp and chamber heating speed. I'm able to get to 40C in about 10 minutes, and maxes out around 60C - your mileage may vary, this is very dependent on how sealed and insulated your printer is!

I used a spare bed spacer (~5.75mm aluminum spacer) that RatRig uses for their bed arms. If you don't have any, I included a bed spacer model you can print.

I used some super glue to get a good seal on the top and bottom pieces, but it isn't required.

Printer requirements

  • Only use this if your printer is enclosed
  • You need to seal and insulate your printer for best results

Print requirements

  • ASA/ABS or more heat resistant material! You don't want these melting

Hardware Required

  • 5015 fan (x2)
  • M3x3 (short) heat insert (x2)
  • M5x9 heat insert
  • M3x20 screw (x2)
  • M5x25 screw

Happy printing!

1 Likes8 DownloadsJuly 17, 2024
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy