- 👾 Discord access to chat about what I'm working on, CAD, and 3D printing!
- 🔥 Download **3** of my exclusive designs to **print** per month (with rollover credits!)
   - 1-2 new designs per month
   - Designs range from smartwatch charging stands, to fidget toys, to travel
accessories, so there's something for everyone!


** This is a license to print the physical products, not to sell them. The digital files are NEVER for sharing.

Maker: Limited Personal Plan

- Everything in the previous tier
- 👾 Exclusive **Discord channel** where I will dedicate more time to help you with the following:
   - 📈 **Improving the performance** of your machine, mods, etc
   - 🔨 **Helping you build/plan/troubleshoot** your own Voron, RatRig, etc machine
   - ⚡️ **Helping plan out and conduct electrical work safely and cleanly** on your custom machine (Power supplies, 24/48v setup, smart switches, relays, breakers, MMUs, toolboards, etc.)


**Note**: There is always a risk when working with mains voltage and modding or building printers. I will advise you on the best and safest ways to go about the work, but I am not responsible for any damage or injury that occurs when you are building or modding your printer.

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Builder: 3D Printer Performance Seekers and Builders

- Everything in the previous tier
- 💰 Access to sell any of my free designs that have the "CC BY-NC-ND 4.0" license 
- 🔥 Get access to **all** of my exclusive designs to **print and sell**
   - Seasonal designs as well as year-round designs!


**Note**: Attribution required: You must credit at the end of your product descriptions with: "Design licensed by BakedBean3D on Thangs."

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Seller: Full Commercial Plan

This is a bracket to mount 5015 fans to a V-Core 3.1's bed (or any bed with 5mm holes), which significantly improves max chamber temp and chamber heating speed. I'm able to get to 40C in about 10 minutes, and maxes out around 60C - your mileage may vary, this is very dependent on how sealed and insulated your printer is!

I used a spare bed spacer (~5.75mm aluminum spacer) that RatRig uses for their bed arms. If you don't have any, I included a bed spacer model you can print.

I used some super glue to get a good seal on the top and bottom pieces, but it isn't required.

Printer requirements
- Only use this if your printer is enclosed
- You need to seal and insulate your printer for best results

Print requirements
- ASA/ABS or more heat resistant material! You don't want these melting

Hardware Required
- 5015 fan (x2)
- M3x3 (short) heat insert (x2)
- M5x9 heat insert
- M3x20 screw (x2)
- M5x25 screw


Happy printing!

RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating

RatRig V-Core 3.1 5015 Bed Fan Mounts for Chamber Heating