- 👾 Discord access to chat about what I'm working on, CAD, and 3D printing!
- 🔥 Download **3** of my exclusive designs to **print** per month (with rollover credits!)
   - 1-2 new designs per month
   - Designs range from smartwatch charging stands, to fidget toys, to travel
accessories, so there's something for everyone!


** This is a license to print the physical products, not to sell them. The digital files are NEVER for sharing.

Maker: Limited Personal Plan

- Everything in the previous tier
- 👾 Exclusive **Discord channel** where I will dedicate more time to help you with the following:
   - 📈 **Improving the performance** of your machine, mods, etc
   - 🔨 **Helping you build/plan/troubleshoot** your own Voron, RatRig, etc machine
   - ⚡️ **Helping plan out and conduct electrical work safely and cleanly** on your custom machine (Power supplies, 24/48v setup, smart switches, relays, breakers, MMUs, toolboards, etc.)


**Note**: There is always a risk when working with mains voltage and modding or building printers. I will advise you on the best and safest ways to go about the work, but I am not responsible for any damage or injury that occurs when you are building or modding your printer.

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Builder: 3D Printer Performance Seekers and Builders

- Everything in the previous tier
- 💰 Access to sell any of my free designs that have the "CC BY-NC-ND 4.0" license 
- 🔥 Get access to **all** of my exclusive designs to **print and sell**
   - Seasonal designs as well as year-round designs!


**Note**: Attribution required: You must credit at the end of your product descriptions with: "Design licensed by BakedBean3D on Thangs."

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Seller: Full Commercial Plan

A low-profile, sleek charging stand for your Apple Watch. This low-profile, modern, charging stand for your Apple Watch looks great even without a watch on it!


**Assembly**
- Slot the charging portion onto the base
- **NOTE**: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C. 
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.



**Printing**
- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
 - **Tip**: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
 - This adds some additional weight to the base

**Features**
- VHB tape cutouts on the base
 - **Note**: I highly recommend you use the VHB tape cutouts on the bottom of the base!


Happy printing!
 
Want to sell this print? Become a member today!

Apple Watch Charging Stand - Floating Pucks

Apple Watch Charging Stand - Floating Pucks

Categories:

Tags: