Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4973633.

I didn't find any gameboy stands that seemed like a proper set... so I made my own! Nothing too fancy, but there's something for all of the consoles. Full disclosure - I haven't tried printing the Light stand as I don't have one. The SP stand is multifunction; you can use it to display the SP open or closed.

I found it best to print them the correct way up. Printing logo down gives a smooth front but I had issues with the overhang (example: gameboy advance). Printing from the back had really "wobbly" results and quite a soft finish to the logo (example: GBA SP).

Depending on your printer, shell and settings, you may need to do some sanding of the inside to make your gameboy fit. Some of the stands are quite snug. 


Gameboy Display Stand Full Set

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5210136.

The gameboy stand set, but *really really small* for the thumby :)

I can't make any promises for the quality of the logos at this size, especially if you're not using a resin printer.

Gameboy Display Stand Full Set - Thumby Edition

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5028442.

Miniature version of Ikea Kallax, with a small storage box I designed to fit inside.

These models are at 1:2 scale, you'll need to scale them before printing.
I printed mine at about 1:7; I wanted them to fit with a Kallax model I bought on aliexpress.
I think a slightly larger print would work well as battery storage.
I also included "quarter" versions of the two larger sizes (5x5 and 4x4) for easier printing on smaller printers.
There's also a "plank" version, in case you want to put it together like a real kallax! Full disclosure, I haven't printed these myself yet.



Model Ikea Kallax with small storage box, various sizes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5141734.

Small model of a hammer and saw, with the wood and metal parts separated so they can be printed individually. Not to any particular scale or level of accuracy; I just needed these for a halloween costume so they only needed to look the part. The saw has a "reversed" (curvy) blade on it, to make it safe, but it's still recognisable as a saw! 

Model Ball Peen Hammer and Saw

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

actualcharky

Achievements

Seedling

Debutant

Gameboy Display Stand Full Set

Gameboy Display Stand Full Set - Thumby Edition

Model Ikea Kallax with small storage box, various sizes

Model Ball Peen Hammer and Saw