Hello! 

I hope you are having a great day :)

The stand that comes with the ROG Ally X is made of paper and is not that strong so I have modelled it and made it printable!

There are two files. The hollow one is similar to the actual stand but will need alot of supports and is much harder to print. I reccommend the solid model as it will be stronger and no supports are needed.

On my Bambu A1 in PLA it printed in under an hour.

There is some room at the front to add some foam similar to the one that comes in the box but it does work without the foam too.

This model is very forgiving as there are no overhangs so no supports are needed and most materials will work. Print at 10% to 15% infill gave me good results.

ROG Ally X - Stand

ROG Ally X Stand - Solid.stl

Hi! These are some printable joystick models for the ROG Ally X. 

The Concave Standard file is the same as the stock joystick on the Ally X.

There is also a domed versions and there are a slightly longer version of both the domed and concave sticks. 

Print in resin for the best results but FDM will work too. 


ROG Ally X - Printable Joystick Mods

ROG Ally X Joystick - Concave Long.stl

These are some printable sticks for any devices that use the Gulikit Nintendo Switch Hall Effect modules such as the Ayaneo Pocket S and Anbernic RG556.

There are various combinations of either a dome top or concave top combined with the regular length or extended. 

For FDM printing, i reccomend printing the stem and topper separately at as small of a layer height as your printer can handle and then gluing them together after for the best results. 

For resin, you can use the files of the stem and top together. 


Nintendo Switch / Pocket S / RG556 Hall Effect Custom Sticks

Concave - Extended.stl

This is a case for the Pinecil soldering iron. 

It can hold the Pinecil with a tip installed and two extra tips. These are the short tips, not the ts100 longer tips.

The magnets used are 6mmx3mmx2mm. Make sure to put them in the right orienation so the base and lid are attracted.

The hinge needs a length of filament pushed through and glued in place to work.

There are 3 storage compartments for your solder, flux or other accessories. 

I have also modelled a stand that you can rest the pinecil on and two inserts for spools of solder or wick. The insert just needs to be printed twice and glued together to make the spool.

If you would like me to make on for a ts100 or for longer tips, I do take commissions so send me a message and I can put together a custom one for you.


Base.stl

This is a mod for the ROG Ally that lets you use the magnetic swappable dpads from the extreme rates kit. 

If you want to print in resin, use "ROG_Ally_Elite_Magnetic_Dpad_for_resin__v1.stl"

For FDM, use "ROG_Ally_Elite_Magnetic_Dpad_v1.stl" and "ROG_Ally_Elite_Magnetic_Dpad_Pivot_v1.stl"

The ring file will work for both.

To see more about this mod and for all of your handheld modding needs visit handheldmodz.com

Thank you to Tekgnome for the idea and helping to test the models.

ROG Ally - Xbox Elite Magnetic DPad Mod

ROG Ally Elite Magnetic Dpad (for resin)  v1.stl

These are printable versions of the ROG Ally joysticks! 

There are Long and Stock options for concave (like the stock ally ones) and domed.

Personally, I would add covers to the tops for more grip but they work fine as they are too :)

You can print it in FDM but Resin will give you the best results!


ROG Ally Printable Joysticks

joysticks-v7.stl

This is a mod for the ROG Ally that replaces the stock dpad with a more traditional plus style one.

The guard covers the gaps left over when you use the modded dpad.

I reccommend printing them in resin with as high resolution as possible!


ROG Ally Plus Style D-Pad Mod

DPad_Plus.stl

Hi! This is an enclosure for the Twelve South StayGo Mini dock that converts it into a more stable dock with a stand. 

The mini can also be removed from the enclosure very easily using the inbuilt ejector when you want to use it for something else. 

Currently the stand is for an ROG Ally either stock (coming soon) or with the 90wh mod backplate seen in the pictures.

Right angle adapter used:
https://www.amazon.co.uk/gp/product/B0BNMCMYNF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


StayGo Mini Dock Enclosure

Enclosure.stl

Hi there!

These are parts to add a second screen to the ally that folds like a clamshell.

Full write up here:
https://github.com/YesItsKira/ROG-Ally-2nd-Screen-Mod/tree/main


ROG Ally Clamshell Screen Mod

Screen_Housing.stl

This is a simple bezel you can print to cover up the black bezel around the screen on the ROG Ally. 

Can be printed in most materials but resin will give the best results.

ROG Ally Bezel.stl

Bezel_v2.stl

This is a version of my ROG Ally Dpad mod that is in the style of a Playstation controller. 

Print in resin for best results.


ROG Ally Playstation Style Dpad Mod.stl

ALLY_PS_DPAD_v1.stl

This is a protector for the SD card slot when the slot is not in use or dead. 

Print in PETG or ABS.


ROG Ally SD Protector.stl

SD_Protector_v3.stl

This is a print to secure a 2280 SSD when using a 90 degree adapter in the ROG Ally.

It uses the fan screw to hold it in place.

Thanks to Tekgnome, LowkeyLoki and DesignGears from the Ally discord for the idea and helping me test it!


ROG Ally SSD Holder.stl

Ally_ssd_holder_v3.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

YesItsKira

Achievements

Seedling