The CannaCaddy Compact - A 2x2 gridfinity module designed specifically to hold your smoking tools.

I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and grinders, etc. Then, of course, I had to make it fit with the rest of my gridfinity setup.

The one shown in green in the pictures was printed using PETG, I had it in the printer and just ran with it, but I would suggest your normal PLA or preferred material.

I'm wrapping up the normal size (The CannaCaddy Classic) and the large size (The CannaCaddy Colossal), but for now, the CannaCaddy Compact can hold:

(1): Medium grinder slot. Average size grinder you see around, roughly 58mm diameter, nothing huge and not the smaller ones. Note: smaller/shorter grinders will be fine, the cutouts on the side make it easy to grab.

(1): Bic/Lighter slot. Slightly larger to accommodate the lighters with wraps.

(2): Vape cartridge/battery slots. Works well for storing your previous cart when you want to try the new one.

(1): 14mm bowl head slot. Works with the 14mm male portion of your (hopefully cleaner than mine) bowl head. Should sit in nicely, but you might have problems if the downstem bit is real long.