W

Belt redesign for FT5 Revision 2 (X-Y idlers)

by
WalterSKW
Follow
Follow
Remix Model
Belt redesign for FT5 Revision 2 (X-Y idlers) 3d model
Belt redesign for FT5 Revision 2 (X-Y idlers) 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2045169.

This is a revised and reworked version from this design Differences : steppermotors are fixed with 4 bolts instead of 2 and adjusting the tension of the belt is now done at the side of the pulley instead of adjusting the stepper. Pulley support is fixed with 3 M5 bolts and nuts in the 2020-profiles. This is a lot easier to manage and one can leave the belt attached to the X-axis all the time when working in that area. Just loosen the pulley support and leave the belt attached.

Things :

  • Larger stepper support for the right side with the integrated cablechain support

  • Stepper support for the left side

  • One pulley support for left and right side

  • conical piece to be mounted under the bearings.

  • new support for the right X-pulley that fits better with the Y-endstop

**20170816 - added 3mm X support **

Tip : Use 3d-Tool to have a detailed look on this thing


0 Likes3 DownloadsOctober 16, 2021


0 Likes3 DownloadsOctober 16, 2021
This model is restricted by licensing terms.