tracking pixel
Werner F

Philips OneBlade Pro Stand v2

by
WF3D
Follow
Follow
Remix Model
WF3D
WF3D
Image 1 of 4
Philips OneBlade Pro Stand v2 3d model
2D
3D
Makes
Philips OneBlade Pro Stand v2 3d model
Philips OneBlade Pro Stand v2 3d model
Philips OneBlade Pro Stand v2 3d model
Philips OneBlade Pro Stand v2 3d model
This model is restricted by licensing terms. 
6 Likes14 DownloadsJune 6, 2024
This model is restricted by licensing terms. 


Size is 115x85 mm. Can be printed in PLA, PETG, ABS etc.

I printed at 0.2 mm layer height with 15% infill in PETG on my Bambulab P1S with no issues. I like the steps on the sloping surface, as it adds some interesting texture to the part. If you want to reduce this effect go with lower layer heights e.g. 0.1 mm.

Every slot has through holes so you can rinse it with water and do not have to mess with cleaning / drying out the holes.


6 Likes14 DownloadsJune 6, 2024




This model is restricted by licensing terms. 
6 Likes14 DownloadsJune 6, 2024
This model is restricted by licensing terms.