Hi! 🎃

Here's another one of my plant pots, this time with a Halloween theme. This pumpkin-like pot has drainage holes and a drip tray to remove excess water—say a firm NO to overwatered plants! 🌱💧 Its internal dimensions are 150 mm in diameter and 120 mm in height. Keep in mind, if you scale the model, the drip tray might not fit.

The design has two parts:

🎃 220624-07-001-COVER– the main cover where you place your pot, with drainage holes to let excess water flow out safely into the tray.

🎃 220624-07-002-TRAY– the drip tray that saves your plants from overwatering.

The "twist and click" mechanism gives a satisfying resistance when you turn the cover, so you know it’s securely in place.

 ORGANIC PUMPKIN TWIST-OFF PLANTER

220624-07-001-COVER.stl

Hey there! I want to show you a lampshade with an organic texture that looks like rocks. It comes in two parts and needs very little material to print – you’ve got to check it out!

Here’s what you’ll need:

- The base "060524-01-001-BASE" which acts as the frame and has a hole for mounting an E27 bulb socket,
- The shade "060524-01-002-DIFFUSOR" which should be printed in vase mode with a wall thickness of 0.6mm (you can do this with a 0.4mm nozzle, so no need to switch to a bigger one),

Putting it together is super easy:

- Print all the parts included,
- Gently press the shade into the slots on the base – no glue required.

And there you have it!

VORONOI PATTERN LAMPSHADE

060524-01-002-DIFFUSOR.3mf

A cubed shaped variation of my voronoi themed organizers.

VORONOI PATTERN CONTAINER

080724-01-000-VORONOI PATTERN CONTAINER.3mf

Say no more to a messy kitchen sink.
The inside of this tray is sloped and there is a drain in one of the corners so all excess water from the sponge can be removed.

In order to clean it, just remove the top piece and give it a good shower.


SPONGE TRAY

090624-02-001-BASE.stl

This pen holder combines simple geometric shapes with organic patterns. It will be great for modern interiors, where minimalism dominates.

Here are some tips that might be helpful while printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: follow your filament manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

VORONOI PEN HOLDER

250424-01-001-VORONOI PEN HOLDER.3mf

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

BUBBLE VASE

040424-01-000-BUBBLE VASE.3mf

TRAINGULAR EASTER EGG SCULPTURE

150324-01-000-TRAINGULAR EGG.stl

ORGANISER

120324-01-001-BASE.3mf

WAVE ALOE PLANTER 2

060823-01-001-POT.3mf

This model is designed to be printed in place, do not use supports or brim.

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,

TRASH CAN

041122-01-001-BIN.stl

JEWELRY HOLDER - TREE

200722-01-000-JEWELRY HOLDER - TREE 3.3mf

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: do not scale the model,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: required,
- supports: not required,

INSTAX PHOTO HINGED FRAME - VALENTINES DAY (2 slots) (print in place)

050223-01-000-INSTAX PHOTO HINGED FRAME - VALENTINES DAY (2 slots).3mf

Tips for printing this model:
- orientation: all uploaded files are in the correct orientation,
- scale: scale the model as desired,
- temperatures: depending on the material used and the manufacturer's guidelines,
- layer height: 0.2mm or less,
- number of outlines: 2 or more,
- infill: 15% or greater,
- brim: not required,
- supports: not required,


SPIRAL GROOVED VASE

230124-02-000-SPIRAL GROOVED VASE.3mf

ORNAMENT DECORATION

201223-01-000-ORNAMENT DECORATION.stl

211223-01-000-ORNAMENT DECORATION.3mf

ORNAMENT DECORATION 1

211223-02-000-ORNAMENT DECORATION.3mf

COFFEE MUG COASTER

110124-01-000-COFFEE MUG COASTER.3mf

RHOMBOIDAL POT

210124-01-000-RHOMBOIDAL POT.3mf

HONEYCOMB PEN HOLDER

130621-01-000-HONEYCOMB PEN HOLDER.3mf

MUSHROOM PEN HOLDER

100821-01-000-MUSHROOM HOLDER.3mf

HEXAGONAL PATTERN VASE

301222-01-000-HEXAGONAL PATTERN VASE.3mf

HEXAGONAL PHONE STAND

091122-01-000-HEXAGONAL PHONE STAND.3mf

Becoming a member of this plan gives you an access to all of my published models. Feel free to print and sell them.
I'll be happy to help you with any doubts regarding my designs :)


ALL INCLUSIVE

250424-01-001-VORONOI PEN HOLDER.stl

060524-01-001-BASE.3mf

Hello!

I’m introducing a project for a two-part plant pot cover. There are many similar projects available online, but I wanted to create my own. This led to the development of a rotating fastening system, and this is my first public project that uses it.

The cover consists of two parts:

    220624-04-001-TRAY – a drip tray that protects your plants from overwatering,

    220624-04-002-PLANTER – the main cover, inside of which the plant pot can be placed. The drainage holes in the cover allow for safe removal of excess water into the tray in case of overwatering.

The cover connects to the tray using an integrated “twist and click” mechanism. The tolerances are adjusted so that you can feel a satisfying resistance when turning the cover to release it.

The internal diameter of the cover is 130 mm, and the height is 90 mm. Scaling the elements may result in the clip not functioning properly!

If you like my project, be sure to check my profile - you will find a lot of useful models there!

IONIC COLUMN TWIST-OFF PLANTER

220624-04-001-TRAY.stl

220624-04-002-PLANTER.stl

Hello! :)

I mainly design interior decorations and useful everyday objects. 

As a member, you'll get access to my ever-growing database of designs. Being a member gives you rights to print and sell physical objects based on my models.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Toprototyp

Achievements

Sapling

Fan Favorite

Pinned models

VORONOI PEN HOLDER

VORONOI PATTERN CONTAINER

VORONOI PATTERN LAMPSHADE

IONIC COLUMN TWIST-OFF PLANTER

ORGANIC PUMPKIN TWIST-OFF PLANTER

VORONOI PATTERN LAMPSHADE

VORONOI PATTERN CONTAINER

SPONGE TRAY

VORONOI PEN HOLDER

BUBBLE VASE

TRAINGULAR EASTER EGG SCULPTURE

ORGANISER

WAVE ALOE PLANTER 2

TRASH CAN

JEWELRY HOLDER - TREE

INSTAX PHOTO HINGED FRAME - VALENTINES DAY (2 slots) (print in place)

SPIRAL GROOVED VASE

ORNAMENT DECORATION

ORNAMENT DECORATION

ORNAMENT DECORATION 1

COFFEE MUG COASTER

RHOMBOIDAL POT

HONEYCOMB PEN HOLDER

MUSHROOM PEN HOLDER

HEXAGONAL PATTERN VASE

HEXAGONAL PHONE STAND