tracking pixel
Profile Image
TheCraftyMaker
TheCraftyMaker

TheCraftyMaker

My name is Christof and I'm located in Belgium. I'm a professional software developer and maker in my spare time. I design practical and fun 3D models for 3D printing and fiddle with electronics. I also love to play piano & have a serious Lego addiction.

Linktree

Follow

Select a membership plan

Monthly billing
Annual billing

Model is included in this plan
Available now

15% off
The Crafty Family
The Crafty Family
$4.25
/ month
when billed annually

Welcome to the family. With an active The Crafty Family subscription you'll gain access to:

  • Subscription-only designs in addition to all other free designs available on The Crafty Maker catalog.
  • Monthly designer updates
Immediate access. Cancel anytime.

Model is included in this plan
Available now

15% off
The Crafty Companion
The Crafty Companion
$8.50
/ month
when billed annually

Welcome companion. With an active The Crafty Companion subscription you'll gain access to:

  • Subscription-only designs in addition to all other free designs available on The Crafty Maker catalog.
  • A commercial license to legally sell 3D prints created from the designs available on The Crafty Maker catalog. Active subscribers are licensed to sell these prints on any platform of their choice.

The digital files are NOT for resale or distribution. Commercial license is only given to active subscribers. If you choose to cancel your subscription, your commercial license will end at the time your access expires.

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.
AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
TheCraftyMaker

The Starry Night Shadow Box

by
TheCraftyMaker
Follow
Follow
Remix Model
Social
TheCraftyMaker
TheCraftyMaker
|
Image 1 of 10
The Starry Night Shadow Box 3d model
TheCraftyMaker
TheCraftyMaker
|
Image 1 of 10
The Starry Night Shadow Box 3d model
2D
3D
Makes
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box 3d model
The Starry Night Shadow Box - Another fantastic shadow box from Christof; this time it's my FAVORITE Van Gogh, so you know I had to print one! I had a little trouble getting the filaments to match (as the brand Christof uses is not available in the US), but I hope I got it close enough! - 3d model
This model is restricted by licensing terms. 
View license.

Introducing my third artful shadow box using Hueforge, the filament painting software.

It's a reproduction of "The Starry Night" by Vincent van Gogh.

Van Gogh was seeking respite from plaguing depression at the Saint-Paul asylum in Saint-Rémy in southern France when he painted The Starry Night. It reflects his direct observations of his view of the countryside from his window as well as the memories and emotions this view evoked in him.

I've used the following colors:

Plate 1

  • Start with Sunlu PLA Black
  • At layer #4 (0.40mm) swap to Fillamentum ExtraFill PLA Cobalt Blue
  • At layer #5 (0.48mm) swap to Fillamentum ExtraFill PLA Traffic Yellow
  • At layer #8 (0.72mm) swap to Fillamentum ExtraFill PLA Purple Red for the rest.

Plate 2

  • Start with Sunlu PLA Black
  • At layer #5 (0.48mm) swap to Fillamentum ExtraFill PLA Wizard's Voodoo
  • At layer #9 (0.80mm) swap to Fillamentum ExtraFill PLA Baby Blue
  • At layer #11 (0.96mm) swap to Fillamentum ExtraFill PLA Sky Blue
  • At layer #17 (1.44mm) swap to Fillamentum ExtraFill PLA Traffic Yellow
  • At layer #20 (1.68mm) swap to Fillamentum ExtraFill PLA Traffic Red for the rest.

Plate 3

  • Start with Sunlu PLA Black
  • At layer #4 (0.40mm) swap to Fillamentum ExtraFill PLA Cobalt Blue
  • At layer #8 (0.72mm) swap to Fillamentum ExtraFill PLA Sky Blue
  • At layer #13 (1.12mm) swap to Fillamentum ExtraFill PLA Traffic Yellow
  • At layer #17 (1.44mm) swap to Fillamentum ExtraFill PLA Traffic Red for the rest.

Plate 4

  • Start with Sunlu PLA Black
  • At layer #4 (0.40mm) swap to Fillamentum ExtraFill PLA Cobalt Blue
  • At layer #9 (0.80mm) swap to Fillamentum ExtraFill PLA Sky Blue
  • At layer #13 (1.12mm) swap to Fillamentum ExtraFill PLA Baby Blue
  • At layer #19 (1.60mm) swap to Fillamentum ExtraFill PLA Orange Orange
  • At layer #20 (1.68mm) swap to Fillamentum ExtraFill PLA Traffic Yellow for the rest.

It consists of 4 numbered plates.

You can find the box to display this set here

The box with lid and the wall mountable box are both Club member exclusives. (Box with lid also available for individual purchase on Cults3D)

Try to match the colors as good as possible if you don't have the filaments I've used.

Since these are rather complex STL files, slicing can take a while. Some of the STL files may report an error, please do not fix them! You will lose details if you do. The errors are a result of the complex STL file Hueforge produces.

Print settings

  • Layer height of 0.08mm with a base layer of 0.16mm
  • No supports
  • 100% infill
  • The STL's contain a very thin layer where the empty space should be. This is an artefact that Hueforge leaves in the STL. The slicer will ignore it when slicing.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.

Categories:

Art
Hueforge
,
Art
Shadow Box

Tags:

83 Likes75 DownloadsDecember 18, 2023
83 Likes75 DownloadsDecember 18, 2023
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy