tracking pixel
Profile Image
TheCraftyMaker
TheCraftyMaker

TheCraftyMaker

My name is Christof and I'm located in Belgium. I'm a professional software developer and maker in my spare time. I design practical and fun 3D models for 3D printing and fiddle with electronics. I also love to play piano & have a serious Lego addiction.

Linktree

Follow

Select a membership plan

The Crafty Family
$5.00
/ month

Welcome to the family. With an active The Crafty Family subscription you'll gain access to:

  • Subscription-only designs in addition to all other free designs available on The Crafty Maker catalog.
  • Monthly designer updates
The Crafty Companion
$10.00
/ month

Welcome companion. With an active The Crafty Companion subscription you'll gain access to:

  • Subscription-only designs in addition to all other free designs available on The Crafty Maker catalog.
  • A commercial license to legally sell 3D prints created from the designs available on The Crafty Maker catalog. Active subscribers are licensed to sell these prints on any platform of their choice.

The digital files are NOT for resale or distribution. Commercial license is only given to active subscribers. If you choose to cancel your subscription, your commercial license will end at the time your access expires.

TheCraftyMaker

Anycubic Mega Zero 2.0 5015 cooling fan duct

by
TheCraftyMaker
Follow
Follow
Remix Model
TheCraftyMaker
TheCraftyMaker
Image 1 of 5
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
TheCraftyMaker
TheCraftyMaker
Image 1 of 5
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
2D
3D
Makes
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
Anycubic Mega Zero 2.0 5015 cooling fan duct 3d model
This model is restricted by licensing terms. 
6 Likes15 DownloadsMarch 1, 2023
This model is restricted by licensing terms. 


Cooling fan duct that provides better part cooling using a 5015 centrifugal blower fan for the Anycubic Mega Zero 2.0. Can be mounted without disassembling the fan shroud.

One M3*20 bolt + nut needed for mounting the blower fan.

Supports needed for the bridges of the air outlets and the overhang on the attachment plate.

MZ 2.0 Part Cooler 5015 can be printed in PLA. The air ducts are a little bit further away from the heater block and nozzle to prevent deformation. This will not affect part cooling. I've been using this duct for months without issues with the fan only at 75%.

MZ 2.0 Part Cooler 5015 Extended is a version with the air ducts close to the nozzle. Print this part in PETG or a filament with a higher glass transition temperature than PLA.

I recommend a silicone sock for both fan ducts to improve temperature stability of the hottend.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.


6 Likes15 DownloadsMarch 1, 2023




This model is restricted by licensing terms. 
6 Likes15 DownloadsMarch 1, 2023
This model is restricted by licensing terms.