Jacob C

WALL-E BnL Cooler Kit (No Support, No AMS, No Glue)

by
The Kit Kiln
Follow
Follow
Remix Model
2D
3D
Makes
instagram-play
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) - Brim on Handle only.  Still working on finishing WALL-E but have his cooler ready for trinkets and 6-Packs of Oil.
 - 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) - Straight out of the repair shop with a shiny new cooler BLING-E is ready for work! - 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) - Smaller cooler is 100%, larger is 175%. Used a 15mm brim for the handle only and slowed print down on the last 25% of the handle. Rectilinear infill for the handle. Scaling to 175% went smooth. No other edits were needed except I increased wall thickness to 4 walls knowing my kids will abuse the cooler. Cheers. - 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) - B&L cooler along with WALL-E. - 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3d model
WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) - The perfect party accessory every WALL-E needs  - 3d model
This model is restricted by licensing terms. 

WALL-E can't go anywhere without his cooler! And you can't store anything without this functional display either ;) This kit is roughly 6 inches (14cm) wide and 5 inches (12cm) tall. This hooks onto the back of our WALL-E kit!

Shop the colors we used in this model on our Amazon Storefront

As with all of our models, this prints with no supports, assembles with no glue, and doesn't require a multi-material 3D printer! Assembly instructions are included in the download with the files, and the print settings are listed in the photos above ^

Come join our growing discord server of over 1800 members!


405 Likes944 DownloadsAugust 30, 2024


405 Likes944 DownloadsAugust 30, 2024
This model is restricted by licensing terms.