This featured model from gazzaladra is part of the Thangs Presents! Dopamine Decor membership plan.

If you enjoy this model, be sure to check out other models from gazzaladra and follow for more amazing content!

Three different coral inspired wall hooks. Often you don’t have enough hooks for your clothes and accessories – with these designs you can always add more extra pieces to one hook. All three designs are provided in two versions. One with the cut-out holder for fixation with screws and one with a flat back for fixation with wall mount glue.

Instructions (screw version)

• Print the hook and the according holder. The holder has a clearance of 0.2 mm to slide in with a little friction. If your printer has issues with bridging, and the holder does not fit – you can scale the holder down a bit.
• Mount the holder onto the wall with screws and dowels. The Diameter of the screw holes is 5.5 mm. The distance of the screw holes is 16 mm.
• Slide in the holder from the side.

Instructions (glue version)

• Print the complete corals and glue them to your wall with specialized wall mount glue.

Size approximately: 80x80x60 mm You can mirror the corals in your slicer to have 6 different versions.

Print settings Material usage per coral: ca 40g Print time per coral: 3-4 h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 5 (2mm thickness)

Top/Bottom Layers: 6 (1,2mm thickness) Infill: 30% Build plate adhesion type: none