By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
If you enjoy this model, be sure to check out other models from CharlesRegaud and follow for more amazing content!
PINCH | Watering Can
Designed for fast printing, PINCH is a compact and stylish watering can designed for urban gardeners, plant enthusiasts, and anyone with a green thumb.
I designed it with the following in mind:
A safe and unique grip you can grasp with your entire hand, no traditional thin handle.
The top and pouring spout are open so you don't have to wonder "when" the water is going to pour out
Each layer is just one continuous curve for fast printing. No holes and gaps and bridges that would create stringing and slow down the print.
The capacity is about 0.5L
More versions coming soon for larger volumes!
DIMENSIONS | W 57mm x L 220mm x H 245 mm
Printing | ~3h
3D PRINTING SETTINGS
For a watertight result, make sure your printer is well calibrated and lubricated.
Then, increase the wall line count to 3.
That should do it!
Resolution: 0.2mm / layer or less
Infill: None
Build adhesion type: None
Supports: None