By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
If you enjoy this model, be sure to check out other models from gazzaladra and follow for more amazing content!
A system of modular and stackable boxes to store your stuff of any use.
When combining the boxes, the height adds up for more combination possibilities. The lids can be placed without removing the stacking capabilities.
Included sizes:
100mm equals “1” in the nomenclature of the files.
Example: the 1x1x1 box is 100x100x103 mm big (the extra 3mm in height are the bevel)
1x1x0,5; 1x1x1; 1x1x1,5; 1x1x2; 1x1_lid
1x2x0,5; 1x2x1; 1x2x1,5; 1x2x2; 1x2_lid
2x2x0,5; 2x2x1; 2x2x1,5; 2x2x2; 2x2_lid
Print settings
Required build volume: with 210x210x210 mm build volume every box can be printed
Material usage example box 1x1x1: 100g box + 15g lid
Print time example box 1x1x1: 8h box + 1h lid
Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2
Outer walls: 3
Infill: 15%
Build plate adhesion type: none