With two button batteries, some wire and an LED, you can also make the snowman light up.
It's a little tricky, but once set correctly, you can turn the hat to turn the light on and off.

Snowman

Snowman-Body.stl

Snowmen on the ears. I hope your ears don't get too cold.. :-)

Snowman Earrings

Snowman-Earring.stl

All you need is a piece of string and your text. The insert size is 45x41mm.
I hope you can send your Santa Claus to many friends.

Wish you all a Merry Christmas!

Christmas Kit Card - Santa Claus

Santa-rot.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5973565.

German:
Verhindert den Alarm bei Nichtverwendung des Sicherheitsgurtes. Unterdrückt den Warnton. Anstelle des Gurtes in das Gurtschloss stecken. Dieser Gurtadapter (Alarm Stopper) darf nur verwendet werden, um den Signalton zu unterdrücken, wenn dieser durch Gegenstände auf dem Beifahrer - oder Rücksitz ausgelöst wird. Warnung: Die Verwendung erfolgt auf eigene Gefahr. Der Gurtadapter (Alarm Stopper) darf nicht von gurtpflichtigen Personen verwendet werden. Bitte achten Sie darauf, dass Gegenstände bei plötzlichem und / oder starkem Bremsen nicht verkehrsbehindernd durch das Fahrzeug fliegen können. Die Beachtung der StvO liegt ausschliesslich bei dem Anwender. Auf die Anschnallpflicht nach Strassenverkehrsgesetz wird ausdrücklich hingewiesen.

English:
Prevents the alarm from not using the seat belt. Suppresses the warning tone. Insert into the buckle instead of the belt. This belt adapter (alarm stopper) may only be used to suppress the signal tone if it is triggered by objects on the front passenger or rear seat. Warning: Use at your own risk. The belt adapter (alarm stopper) must not be used by people who are required to wear a belt. Please ensure that objects cannot fly through the vehicle to obstruct traffic in the event of sudden and/or heavy braking. We expressly point out that seatbelts are compulsory according to the Road Traffic Act.

So that was the legal one.. :-)

Easy to print. You just have to make sure that the printed material can withstand the temperatures in the car (summer).
My PLA was now in the oven at 70°C and kept its shape.

Skull Seat Belt Plug (Alarm Stopper)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6256000.

Printed with manually added supports. These are a little tricky to remove from the pumpkin.
I definitely recommend that XY sizing be used to make the wall thicknesses a bit thicker.

It's not easy, but definitely a worthwhile earring.

Halloween Pumpkin Earrings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5912580.

Easy to print.
I recommend a small support direct underneath the egg.
I printed the legs with orange pla and topped it with white. 

Hope you like it. 

Easter Egg Earring

Okay.. Don't print this with PLA.. :-)
In your car the temperature will rise up to 60 degrees.

I recommend ASA, it is still "easy" to print and it ist resistant to UV and high temperatures.

At the end you just glue everything together.

Smartphone Holder for Suzuki Vitara

Handyhalter-Vitara-Luftungsring.stl

This honeycomb organizer is expandable. You can also choose between two different connectors or mix them.

Organizer

Organizer_Gerüst-mk3.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5217126.

Thank you Hiob for your post. I took your idea and created a new designet variant of it.

I used 12V "YourLED Eco Basic" by Paulmann and some electronic stuff for the switch.
I chose 12V because I can connect the LED-Light also with the power adapter of the printer. 

But I read many post, that the power adapter of the Mega X is sometimes a little weak. So I preferred to connect it with the normal power connection.

I also created little connectors at the profiles ends to be sure that the profiles are at the right place. 

I hope you will like my LED-Holder-Remake for the Anycubic Mega X.

LED-Beleuchtung Anycubic Mega X

Leiste_Lks-O.stl

Be careful with assembly. It could be that the connectors break.
It would be better if you print the connectors horizontal.

I used a Philips Hue bulb with an E14 fitting. This means that the lamp does not need an on/off switch

Robo-Lamp (Climber)

Oberteil.stl

Bickel.stl

Ellbogen.stl

Fuss.stl

Hand.stl

Unterteil.stl

Verbinder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Stefka13

Achievements

Seedling

Debutant

Pinned models

Robo-Lamp (Climber)

Easter Egg Earring

Snowman

Snowman Earrings

Christmas Kit Card - Santa Claus

Skull Seat Belt Plug (Alarm Stopper)

Halloween Pumpkin Earrings

Easter Egg Earring

Smartphone Holder for Suzuki Vitara

Organizer

LED-Beleuchtung Anycubic Mega X

Robo-Lamp (Climber)