tracking pixel
Alberto E

OZ Rally Racing Wheels | for Mercedes 190E EVO II

by
StanceGT
Follow
Follow
Remix Model
StanceGT
StanceGT
|
Image 1 of 3
OZ Rally Racing Wheels | for Mercedes 190E EVO II 3d model
StanceGT
StanceGT
|
Image 1 of 3
OZ Rally Racing Wheels | for Mercedes 190E EVO II 3d model
2D
3D
Makes
OZ Rally Racing Wheels | for Mercedes 190E EVO II 3d model
OZ Rally Racing Wheels | for Mercedes 190E EVO II 3d model
OZ Rally Racing Wheels | for Mercedes 190E EVO II 3d model

✅ STL Body, rims and tyres and front lights. ✅ Chitubox file pre-supported!

OZ Rally Racing Wheels | for Mercedes 190E EVO II

🔗 Link to Patreon: https://www.patreon.com/stancegt 🔗 Link to Discord: https://discord.gg/PgsD5QauDk 🔗 Link to Instagram to see examples: @stancegt.art

--⚙️ CONFIG --

🛠️ It is possible that the assembly of the car may require the use of a file, sandpaper or small drill bit to make the parts fit together correctly.

The example model has been printed at 6cm long, although larger models can be made if desired.

🖨️ Printer: Uniformation GKTWO (SLA Printer) 💧 Resin: ELEGOO 8K

▪️ Layer Height: 0.02 ▪️ Bottom Layer Count: 16 ▪️ Exposeture Time: 2s ▪️ Ambient temperature: 25ºC ▪️ Rest Time Before Lift: 0.5s ▪️ Rest Time After Lift: 0.0s ▪️ Rest Time After Retract: 2s ▪️ Bottom Lift Distance: 2 + 5mm ▪️ Lifting Distance: 2 + 2 mm ▪️ Bottom Retract Distance: 7 + 0 mm ▪️ Retract Distance 2 + 2 mm ▪️ Bottom Lift Speed: 80 & 100 mm/min ▪️ Lifting Speed: 120 & 220 mm/min ▪️ Bottom Retract Speed: 100 + 0 mm/min ▪️ Retract Speed: 220 & 80 mm/min


8 Likes2 DownloadsMay 18, 2024