tracking pixel
Alberto E

McLaren MP4/4 | SCALED | Scale model kit car

by
StanceGT
Follow
Follow
Remix Model
StanceGT
StanceGT
|
Image 1 of 4
McLaren MP4/4 | SCALED | Scale model kit car 3d model
StanceGT
StanceGT
|
Image 1 of 4
McLaren MP4/4 | SCALED | Scale model kit car 3d model
2D
3D
Makes
McLaren MP4/4 | SCALED | Scale model kit car 3d model
McLaren MP4/4 | SCALED | Scale model kit car 3d model
McLaren MP4/4 | SCALED | Scale model kit car 3d model
McLaren MP4/4 | SCALED | Scale model kit car 3d model

✅ STL files for the body & wheels ✅ Chitubox file pre-supported!

Important: A hand drill with a fine bit and sandpaper is required to adjust the pieces. This is because some resins tend to expand slightly.

Presenting the iconic McLaren MP4/4 in a detailed 1:43 scale, this high-quality model captures the essence of the legendary race car that dominated the 1988 F1 season. This car took historic drivers like Ayrton Senna and Alain Prost to the pinnacle of motorsport, and now you can have it in a ready-to-print version.

Model Features: This meticulously designed MP4/4 includes every essential component for an authentic assembly, with high-quality STL files of the wheels, rims, suspension arms, canopy, seat, steering wheel, gear shifter, and rear wing. To streamline the printing process, the file is already preconfigured in Chitubox, allowing you to export it directly in CTB format and start printing without the need for additional supports.

An Icon with History: Recognized as one of the most dominant cars in F1 history, the McLaren MP4/4 won 15 out of 16 races in 1988. This model not only revolutionized F1 design but is also remembered as a symbol of innovation and perfection in the sport.

Add this historic tribute to your collection with the StanceGT McLaren MP4/4—a piece that celebrates a golden era in motorsport and serves as a true homage to iconic engineering and design. Ideal for true F1 fans and 3D model enthusiasts!

PRINTING PARAMETERS:

It is possible that the assembly of the car may require the use of a file, sandpaper or small drill bit to make the parts fit together correctly.

The example model has been printed aprox. at 7cm long, although larger models can be made if desired.

Printer: Uniformation GKTWO (SLA Printer) Resin: Uniformation PLA Plant-Based Resin(X13 Grey) Layer Height: 0.02 Bottom Layer Count: 12 Exposeture Time: 2.6s Ambient temperature: 25ºC Rest Time Before Lift: 0.5s Rest Time After Lift: 0.0s Rest Time After Retract: 2s Bottom Lift Distance: 2 + 5mm Lifting Distance: 2 + 2 mm Bottom Retract Distance: 7 + 0 mm Retract Distance 2 + 2 mm Bottom Lift Speed: 80 & 100 mm/min Lifting Speed: 120 & 220 mm/min Bottom Retract Speed: 100 + 0 mm/min Retract Speed: 220 & 80 mm/min


6 Likes0 DownloadsNovember 1, 2024