tracking pixel
Sparks3D.it

TreeHouse

by
Sparks3D.it
Follow
Follow
Remix Model
Sparks3D.it
Sparks3D.it
|
Image 2 of 7
TreeHouse 3d model
Sparks3D.it
Sparks3D.it
|
Image 2 of 7
TreeHouse 3d model
2D
3D
Makes
TreeHouse 3d model
TreeHouse 3d model
TreeHouse 3d model
TreeHouse 3d model
TreeHouse 3d model
TreeHouse 3d model
TreeHouse 3d model
This model is restricted by licensing terms. 

Imagine being able to bring the magic of a treehouse into your own home. With my 3D Printed Illuminated Treehouse, you can!

Print with - Nozzle 0.4; Layers 0.1/0.2; Recommended infill: 100%; Material: PLA. Assembling the product is very simple, you just need to follow the slots and apply light pressure on the pieces. If you choose to insert a string of LED lights, the rear wall and the floor are designed to accommodate the light switch button and the wire. The diameter of the hole in the floor is 3mm. TreeHouse is designed to house LED lights with a maximum of 3V powered by CR2032 batteries. Attach the battery compartment to the floor at the slot for the switch button and run the wire freely inside the house and around the tree.


9 Likes1 DownloadsDecember 8, 2023


9 Likes1 DownloadsDecember 8, 2023
This model is restricted by licensing terms.