+Spacers ImpulseRC Apex EVO 5" Walksnail Moonlight Antenna, ELRS RP1 V2 Nano Receiver mount

!WARNING! this will not fit with the standard Apex EVO frame you need the included 3d printed extra Spacers wich will make enough room for the FC and ESC Stack. This is the Model made for use without extra Spacers.

This is a Walksnail Moonlight Antenna and ELRS RP1 V2 Nano Receiver Antenna mount for the ImpulseRC Apex EVO 5" with extra Spacers to make more space for the FC and ESC Stack. The ELRS Reciever mount has got to be printed twice and the Antenna then gets put between them. The Long Spacer got to be printed twice for the front and the normal Spacer got to be printed 6 times.

I printed the Spacers and ELRS mount with PLA but you can probably print them in PETG or TPU as well. The Walksnail Moonlight Antenna Mount is printed with TPU and i wouldnt reccomend to print it with PLA I first did that myself but even when only gentely crashing it broke. I dont know how PETG would perform but TPU is probably the most durable in this case.

This are the Spacers alone.