Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6294067.

Just another Shire3D creature!  

Designed this after attending a Local Highland Games and got a little Home Sick.

2 Options One with hair and one without so you can create your own hairy Haggis with a Glue Gun.

When Printing with hair Keep a Close Eye on your printer!  As sometimes they stop extruding, all to do with the Hairify app on Blender.

My best tip follow some tutorials on how to print these with good settings!

Scottish Haggis

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6195828.

This is some of my nightmare creatures but in small form!  

These creatures I have seen in my nightmares and thought why not share some of these things that have scared me in the past with the world?

I am making MORE! So this wont be the last of the creatures!

If you like mt designs why not help me in return? I know cheeky but hey gotta try
https://tinyurl.com/Shire3d

Anywho I have printed them all off and even the Chain in full it is on my TikTok (Same userrname) if you would like to see in their glory

Let me know if the resolution isn't strong enough for you as can update this!

The Nightmare Chain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6042668.

Hey up everyone, here is my latest design for on top of printers.  This will fit on any 20 x 20 V-Slot Printer like CR-10 or Ender ETC.

This was designed sepcifically for the Comgrow Filament Dryer Box link is https://amzn.asia/d/2g327nx

It holds Both spools but I prefer to just use the one until I can get my hands on a Multiple color/spool holder

If you print let me know as I haven't printed it yet just designed

Designed on TinkerCAD  with first Sketches on Shapr3D

EDIT: I have started to print with the following settings

Comgrow Dryer Box Holder

Bobs Throne

throne.stl

Uploaded by Thangs Sync

Designed this for my CR-30 to test out what it can do and how strong the prints will be for tablets etc

Wall Hanger for Things

4 holder wall hanger.stl

8 holder wall hanger.stl

Xbox controller holder.stl

Uploaded by Thangs Sync

This is one of Bob's Enemies!  Its a Mix of Rat and snake!

Becareful They are 5x the size of Bob!  May need his Floaty!  Haven't Seen Floaty?  Its up on Patreon!

RatAke

Bobs Ratake.stl

Uploaded by Thangs Sync
This Is Bobs Creature that helps him get around!

Dont Know Bob?  Get on over to my Patreon to get his whole World SO FAR!!

Tito

Tito.stl

Simple little Chicken, made this for my daughter as she had a massive fascination with Chickens.  She Loves it and all the 14 we printed haha
Uploaded by Thangs Sync

Chicken no legs

Chicken.stl

I designed this for my CR-10 v3 as wanted something that wasnt weighing on the front of the Build Plate.  So now this fixes on to the side or front of the printer

The Best Cam stand to Date

Ultimate Camera Stand CR-10 Pi.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5498655.


Here is the Candy Dish!  Been wanting to do something that is funny and not so pretty for Halloween that doesnt scare/offend anyone so thought, CANDY DISH IN THE SHAPE OF A MOUTH!.  It is not referenced to anyone so if this looks like yours then thats a coincedence.

 

I have signed the bottom of the mouth.  Let me know what you think

 

I am currently working on something for my Kids.  Make sure to follow for more info!

If you want to sell these message me

Halloween Mouth Candy Bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5481472.

Another Nightmare Creature I designed from scratch

Haven’t printed yet so if you do please send me pics

I am thinking of doing a Series on horror creatures

The Tortured Hog

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5481936.

This was a thought I had!  1 Star would have Millions upon Millions of stories. So I designed a falling star desperate to tell their stories

I haven’t printed it just a random thought and went with the design

Star With a Million Stories

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5478844.

Here is my very first attempt at designing a helmet!!

Bare in mind this is huge. I scaled it down to 65% but I do recommend measuring

If you have any ideas let me know

Trying to create another helmet

Thank you

The Brainy Ant

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5451954.

Hey here is a Top Rail spool holder for Creality type rails. It also has a place for the filament sensor at front

Designed this for my Ender 3 Max which is now direct Drive and didn’t want to lose any of the Z axis

Added the bigger size for rolls bigger than the 400g

Tell me what you think

Supports are required



Creality Top Rail Spool holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5422415.

This is just a mash-up of 2 different Files I was given by a friend and decided to use both.

Works great

For Ender 3 Max

Modified Handle and Cam Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5463576.

Instead of the leaning back version We have the vertical

Slides on to the top railing nice and easy

If you flip it round you may not need supports

Spool needs 30% infill just so it’s solid

Creality Vertical Spool and Sensor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5487025.

Hey. 

Just a nicer image of a Egyptian Cat playing in a blanket

Can also be used for Halloween decorations 

Egyptian Cat in Costume

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5440320.

This is to give a better View from the Camera.  I used my Ender 3 Max to print this and came out very nice.  Send Pics

Added a bigger cam holder

Ender 3 Max longer Cam reach

BACK_MOUNT.stl

front_MOUNT.stl

Bad_Zoidberg.stl

Clowny.stl

Cyclops.stl

First_Chain.stl

Smiler.stl

Haggis_Hairy.stl

A guy from the Shire looking to make it in the 3D design and print world!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Shire 3D

Achievements

Seedling

Explorer

Pinned models

The Best Cam stand to Date

The Nightmare Chain

Scottish Haggis

Scottish Haggis

The Nightmare Chain

Comgrow Dryer Box Holder

Bobs Throne

Wall Hanger for Things

RatAke

Tito

Chicken no legs

The Best Cam stand to Date

Halloween Mouth Candy Bowl

The Tortured Hog

Star With a Million Stories

The Brainy Ant

Creality Top Rail Spool holder

Modified Handle and Cam Holder

Creality Vertical Spool and Sensor

Egyptian Cat in Costume

Ender 3 Max longer Cam reach